ANGLE HEADS
AG90 SLENDER DRIVE CLAMPING RANGE: Ø.118"-.236" For Angular Operations Within a Ø1.181 Inch Bore DRIVE RANGE: Ø.118"-.236" For Ang
BASE
HEAD
CLAMPING RANGE: Ø.118"-.157"
2.52
6.97
AG90-CA4SGM-64
3.78
AG90-CA4SGM-96
5.04
AG90-CA4SGM-128
HSK-A63-AGB-177
SMALLEST ENTRY BORE LEST ORE
1.77
CLAMPING RANGE: Ø.118"-.236"
7.72
AG90-CA6SGM-45
3.50
AG90-CA6SGM-89
MAX 2,000 RPM
5.24
AG90-CA6SGM-133
HSK-A100-AGB-196
Ø1.181
1.18 1.18 G G
1.18 1.18 G G
L
K
L
K
Coolant Pipe (Optional)
L 1
L 2
L 1
L 2
Coolant Pipe (Optional)
Ød
Ød
R.12
R.12
M
M
R.709
Fixed Length A .315 Pin Compression
R.827 (S=4.331)
.236 Collar Compression
Fixed Length A .118 Pin Compression
Fig. 1
Fig. 2
Speed Ratio
Weight (lbs.)
Base
Head
Fig.
Ød
G K
L
L 1
L 2
M P
Q
AG90-CA4SGM-64 AG90-CA4SGM-96 AG90-CA4SGM-128 AG90-CA6SGM-45 AG90-CA6SGM-89 AG90-CA6SGM-133 AG90-CA4SGM-64 AG90-CA4SGM-96 AG90-CA4SGM-128 AG90-CA6SGM-45 AG90-CA6SGM-89 AG90-CA6SGM-133
9.49
2.20 5.24 3.46 6.50 4.72 7.76 1.46 4.49 3.19 6.22 4.92 7.95 2.20 4.61 3.46 5.87 4.72 7.13 1.46 3.86 3.19 5.59 4.92 7.32
12.1 12.3 12.6 12.3 12.8 13.2 24.5 24.7 24.9 24.7 25.1 25.6
1:1.06 (Increase)
.118-.157
1
.492 .650
10.75 12.01
7.28
.41 .41
HSK-A63-AGB-177
8.74
1:0.77 (Decrease)
.118-.236
.591 .787
10.47 12.20 10.24 11.50 12.76
7.28
.49 .63
1
1:1.06 (Increase)
.118-.157
.492 .650
8.03
.41 .41
2
HSK-A100-AGB-196
9.49
1:0.77 (Decrease)
.118-.236
11.22 12.95
.591 .787
8.03
.49 .63
2
• Nut and wrench are included; coolant pipe and collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • Automatic tool change may not be available depending on machine tool models • Coolant cannot be supplied through the locating pin
A Stop Block is required. The rotation of the cutting tool is in same direction of the machine spindle. ! CAUTION
ACCESSORIES
COLLET PG. 422
STOP BLOCK PG. 419
STOP BLOCK PG. 419
225
Powered by FlippingBook