COLLET CHUCKS
MEGA MICRO CHUCK CLAMPING RANGE: Ø.018"-.238" (Ø.45-6.05mm) For Micro Drill & End Mill Applications
MAX 32,000 RPM
H 2
H 2
H 1
H 1
G
G
5º
L 1
L 1
L
L
Fig. 1 (High Rigidity Type)
Fig. 2 (Straight Type)
Catalog Number
Max RPM
Weight (lbs.)
Fig.
Ød
ØD L
L 1
H 1
H 2
G
Collet
Nut
Wrench
1.5 1.5 1.5 1.5 1.5 1.5 1.6 1.7
HSK-F63-MEGA4S-75T HSK-F63-MEGA6S-75T HSK-F63-MEGA8S-75T HSK-F63-MEGA4S-75 HSK-F63-MEGA4S-105 HSK-F63-MEGA6S-75 HSK-F63-MEGA6S-90 HSK-F63-MEGA6S-105
.018-.159 .018-.238 .116-.317
.472 2.95 1.73 1.04 1.61 M5 P0.8 NBC4S-
MGN4S MGR12 MGN6S MGR14 MGN8S MGR25
.551 .709
1.12 1.61 M7 P0.75 NBC6S- 1.22 2.28 M9 P0.75 NBC8S-
1
32,000
2.95 1.73
2.95 1.54 4.13 2.99 2.95 1.81 3.54 2.40 4.13 2.99
1.61 1.85 1.61
30,000 25,000 30,000 27,000 25,000
.018-.159
.472
1.04
M5 P0.8 NBC4S-
MGN4S MGR12
2
.018-.238
.551
1.12
M7 P0.75 NBC6S-
MGN6S MGR14
1.93
• MEGA MICRO NUT is included; coolant pipe, collet and wrench must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • Contact us for a plug screw to block a coolant through hole • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
ACCESSORIES
COLLET PG. 368
MEGA NUT PG. 370
SEAL NUT PG. 370
MEGA WRENCH PG. 402
239
Powered by FlippingBook