COLLET CHUCKS
MEGA E CHUCK CLAMPING RANGE: Ø.125"-.500" (Ø3-12mm) Exclusively for High Speed Finish End Milling
COOLANT
MAX 30,000 RPM
THROUGH
L
L 1
H
Adjusting Screw (Optional)
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØD ØD 1
L
L 1
H
Collet
Nut
Wrench
HSK-F63-MEGA6E-65 HSK-F63-MEGA6E-90 HSK-F63-MEGA8E-65 HSK-F63-MEGA8E-90 HSK-F63-MEGA10E-75 HSK-F63-MEGA10E-90 HSK-F63-MEGA10E-105 HSK-F63-MEGA10E-120 HSK-F63-MEGA10E-135 HSK-F63-MEGA13E-75 HSK-F63-MEGA13E-90 HSK-F63-MEGA13E-105 HSK-F63-MEGA13E-135
1.11 1.23 1.29 1.43 1.51 1.62 1.73 1.84 1.93 1.80 1.90 2.01 2.04
2.56 3.54 2.56 3.54 2.95 3.54 4.13 4.72 5.31 2.95 3.54 4.13 5.31
1.34
1.54
1.8 2.0 1.8 2.2 2.2 2.6 2.9 3.5 4.0 2.4 3.1 3.5 4.4
.125-.250 (3-6mm)
.984
MEN6 MGR25 30,000
MEC6-
2.28 1.46-1.77
1.34
1.61
.125-.250 (3-8mm)
1.181
MEN8 MGR30 30,000
MEC8-
2.32 1.65-1.85
1.73 2.32 2.95 3.58 4.21 1.85 2.44
1.89 2.64
30,000
.125-.375 (3-10mm)
1.378
MEN10 MGR35
MEC10-
29,000
1.89-2.28
27,000
1.97 2.52
30,000
.125-.500 (3-12mm)
1.654
MEN13 MGR42
MEC13-
3.07 1.97-2.28 4.25 1.97-2.36
29,000 26,000
• MEGA E NUT is included; coolant pipe, collet, wrench and adjusting screw must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw • Contact us for a plug screw to block a coolant through hole • Adjusting screws cannot be used with models marked • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
ACCESSORIES
COLLET PG. 392
MEGA NUT PG. 393
PERFECT SEAL PG. 393
MEGA WRENCH PG. 402
SCREW PG. 423
241
Powered by FlippingBook