COLLET CHUCKS
MEGA DOUBLE POWER CHUCK CLAMPING RANGE: Ø16-32mm For Heavy Duty End Milling
COOLANT
MAX 28,000 RPM
THROUGH
H
E 1 E
L 1
L
Min. Clamping Length
Catalog Number
Weight (lbs.)
Ød
ØD
ØD 1
L
L 1
H
Wrench
E
E 1
HSK-F63-MEGA16D-80A HSK-F63-MEGA20D-90A HSK-F63-MEGA25D-100A HSK-F63-MEGA32D-105A
16mm 20mm 25mm 32mm
1.654 1.969 2.441 2.756
2.087 2.165 2.480 2.795
3.15 3.54 3.94 4.13
.98
2.17 2.56 2.95 3.15
1.89 1.97 2.20 2.36
1.97 2.20 2.24 2.52
MGR42L MGR50L MGR62L MGR70L
2.6 3.1 4.0 4.4
1.34 1.54 1.30
• Wrench must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” dimension is the Max tool shank length that can be inserted into the holder • Contact us for a plug screw to block a coolant through hole • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools
H
COOLANT
JET THROUGH
Min. Clamping Length E
THROUGH
L 1
L
Catalog Number
Weight (lbs.)
Ød
ØD
ØD 1
L
L 1
H
E
Wrench
16mm 20mm 25mm 32mm
HSK-F63-MEGA16DS-80A HSK-F63-MEGA20DS-90A HSK-F63-MEGA25DS-100A HSK-F63-MEGA32DS-105A
1.654 1.969 2.441 2.756
2.087 2.165 2.480 2.795
3.23 3.62 4.02 4.21
1.06 1.42 1.61 1.38
2.24 2.64 3.03 3.23
1.89 1.97 2.20 2.36
MGR42L MGR50L MGR62L MGR70L
2.6 3.1 4.0 4.4
• Wrench must be ordered separately • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • Jet-through type provides coolant form the chuck nose, thus tools with oil holes cannot be used • “H” dimension is the Max tool shank length that can be inserted into the holder • Contact us for a plug screw to block a coolant through hole • If HSK tool holders are used in a machine which does not recommend the center through coolant, the plug screw should be mounted to our tools ACCESSORIES
PERFECT SEAL/ JET COLLET PG. 395
COLLET PG. 398
MEGA WRENCH PG. 402
242
Powered by FlippingBook