COLLET CHUCKS
Catalog Number
H Max
Max RPM
Weight (lbs.)
Ød
ØD ØD 1
L
L 1
H
Collet
Nut
Wrench
2.9 3.1 3.3 3.7 4.0 4.2 5.3 3.1 3.3 3.5 4.0 4.4 4.8 5.9 3.3 3.5 4.0 4.6 5.1 5.7 7.0 5.7 6.6 5.9 7.0 6.2 7.1 7.5 6.6 7.5 8.1 9.5
C6-MEGA8E-60 C6-MEGA8E-75 C6-MEGA8E-90 C6-MEGA8E-105 C6-MEGA8E-120 C6-MEGA8E-135 C6-MEGA8E-165 C6-MEGA10E-65 C6-MEGA10E-75 C6-MEGA10E-90 C6-MEGA10E-105 C6-MEGA10E-120 C6-MEGA10E-135 C6-MEGA10E-165 C6-MEGA13E-65 C6-MEGA13E-75 C6-MEGA13E-90 C6-MEGA13E-105 C6-MEGA13E-120 C6-MEGA13E-135 C6-MEGA13E-165 C8-MEGA6E-90 C8-MEGA6E-135 C8-MEGA8E-90 C8-MEGA8E-135 C8-MEGA10E-90 C8-MEGA10E-120 C8-MEGA10E-135 C8-MEGA13E-90 C8-MEGA13E-120 C8-MEGA13E-135 C8-MEGA13E-165
1.29 1.35 1.44 1.56 1.66 1.76 1.98 1.51 1.54 1.64 1.75 1.85 1.97 2.18 1.78 1.81 1.93 2.02 2.13 2.24 2.45 1.21 1.52 1.39 1.70 1.59 1.81 1.90 1.85 2.07 2.16 2.38
2.36 2.95 3.54 4.13 4.72 5.31 6.50 2.56 2.95 3.54 4.13 4.72 5.31 6.50 2.56 2.95 3.54 4.13 4.72 5.31 6.50 3.54 5.31 3.54 5.31 3.54 4.72 5.31 3.54 4.72 5.31 6.50
1.30
2.01
2.01
32,000 30,000 30,000 28,000 25,000 23,000 20,000 32,000 30,000 30,000 27,000 23,000 20,000 17,000 30,000 30,000 28,000 25,000 22,000 18,000 15,000 20,000 14,000 20,000 16,000 20,000 20,000 16,000 18,000 17,000 14,000 12,000
1.89 1.65-1.81 2.60
2.48 3.07 3.66 4.25 5.51 1.50 1.89 2.48 3.07 3.66 4.33 5.55 1.54 1.93 2.60 3.15 3.78 4.41 5.55 2.17 3.94 2.17 3.94 2.17 3.35 3.94 2.17 3.35 3.94 5.12
3.19 3.78 4.37 4.96 6.14 2.20 2.60 3.19 3.78 4.37 4.96 6.14 2.20 2.60 3.19 3.78 4.37 4.96 6.14 3.54 5.31 3.54 5.31 3.54 4.72 5.31 3.54 4.72 5.31 6.50
.125-.250 (3-8mm)
1.181
MEN8 MGR30
MEC8-
1.65-2.01
2.20 2.60
.125-.375 (3-10mm)
1.339
MEN10 MGR35
MEC10-
1.89-2.28
2.20 2.60
1.97-2.17
.125-.500 (3-12mm)
1.654
MEN13 MGR42
MEC13-
1.97-2.36
.125-.250 (3-6mm)
.984
1.46-1.77
MEN6 MGR25
MEC6-
.125-.250 (3-8mm)
1.181
1.65-2.01
MEN8 MGR30
MEC8-
.125-.375 (3-10mm)
1.378
1.89-2.28
MEN10 MGR35
MEC10-
.125-.500 (3-12mm)
1.654
1.94-2.36
MEN13 MGR42
MEC13-
• MEGA E NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds
• “H” indicates the adjustment length with an adjusting screw • Adjusting screws cannot be used with models marked
ACCESSORIES
COLLET PG. 392
MEGA NUT PG. 393
PERFECT SEAL PG. 393
MEGA WRENCH PG. 402
SCREW PG. 423
259
Powered by FlippingBook