HYDRAULIC CHUCKS
HYDRAULIC CHUCK LATHE TYPE — B TYPE CLAMPING RANGE: Ø3-10mm
Max Insertion Depth H
Min Clamping Length E
M6
L 1
ø6mm (x2)
25mm
L
28mm
Catalog Number
Weight (lbs)
Ød
ØD
L
L 1
H
E
3mm 4mm 6mm 8mm
SL22B-HDC3-45 SL22B-HDC4-45 SL22B-HDC6-40 SL22B-HDC8-40 SL22B-HDC10-40
.28 .35 .20
1.57 1.65 2.17
.63 .75 .98
.7 .7 .7 .7 .7
.551
1.77
.709 .787 .866
1.22 1.30
1.57
.24
2.13
10mm
• “E” is the min. clamping length • “H” indicates the adjustment length with an adjusting screw • Some coolant may leak from the inner diameter slits when center through coolant is used with models marked
Use only cutting tools that have a shank tolerance of h6 (see table pg. 26). Do not use with cutting tools made with a flat on the shank (ie: Weldon type shank). Roughing end mills are not recommended for use with hydraulic chucks. Do not tighten the clamping screw without first inserting a cutting tool into the tool holder. Always insert the cutting tool into the hydraulic tool holder beyond min. clamping length “E”. ! CAUTION
ACCESSORIES
GRIP BAR PG. 407
322
Powered by FlippingBook