TURNING TOOLS 45º TILT STYLE, TYPE S OVERVIEW
THE FIRST MODULAR TOOLING SYSTEM FOR TURNING APPLICATIONS ON MILL-TURN MACHINES A modular tooling system offers better efficiency, material selection, heat treatment and optimal tool lengths. Easily replace broken inserts. Boring bar & square tool holder options also available.
45º TILT STYLE TYPE S
45º
R
SPINDLE SYSTEM DUAL CONTACT
MINIMIZED CUTTING FORCES Tilting the B axis 45º helps to minimize the cutting forces transmitted to the machine spindle. This force reduction increases the life of the machine spindle & insert life.
With the B axis at 45º, accessibility problems with the chuck or tailstock are overcome to minimize tool length.
45º
COOLANT
SHORT
THROUGH
Basic Holder
SECURE AND RIGID TYPE S CARTRIDGE CLAMPING SYSTEM Using highly sophisticated and modern machine tools, Type S cartridges are made to very close tolerances required for turning accuracy and repeatability. The cartridge is located in the basic holder by means of a precision ground pilot and secured by 2 opposing radial screws with a 15º taper. With a slight offset to locating sockets, high face-to-face clamping force of the two components is generated. To maintain precise locations and orientation, an additional locating pin is included for positive transfer of cutting torque.
Cartridge
AVAILABLE IN BCV, BBT, HSK & BIG CAPTO
Coolant Nozzle
15 CARTRIDGES FOR 45º TILT STYLE TYPE S LE
Very Precise Locating Pilot
Locking Screw 2x
Orientation Pin
Face-To-Face Clamping
40
Powered by FlippingBook