FINE BORING HEADS
OD TURNING HOLDERS FOR EWN/EWE RANGE: Ø.039"-1.260"
By using an eccentric bar on the fine boring heads EWN/EWE 2-152, it is possible to turn outside diameters up to 1.260" with lengths up to 2". The counterweight is moveable on the eccentric bar. By moving the counterweight, the imbalance can be compensated to a minimum.
Max Spindle Speeds
e L = 1.06 (RPM)
L = 2.05 (RPM)
0
8000 6000 4000 3000
6000 4500 3500 2500
.020 .098 .177
• Adjustment of the scale in clockwise direction and eccentric bar with cutting edge positioned as shown on the drawing, results in a smaller pin diameter. Counter-clockwise rotation of spindle. ! CAUTION
e
EXTENSION
ECCENTRIC BAR
M10
.98
2.05
M10
Catalog Number
Reference Number
ST16-25
10.615.228
2.80
1.06
ACCESSORIES
Reference Number
Catalog Number
ØD
SPARE PARTS PG. 571
ST5/8"-OD-32
10.615.391
.039-1.260
INSERT HOLDERS
Catalog Number
Reference Number 10.615.292 10.615.287 10.615.286 10.615.285 10.615.284 10.615.290 10.615.289 10.615.282
ØD
Insert
E45T E40T E36T E32T E28T E24T E20T E18T
.039-.197 .197-.394 .394-.551 .551-.709
M10
1.06
1.06
TC 11
ACCESSORIES
.709-.866 .866-1.024 1.024-1.181 1.102-1.260
APPLICATION ADVICE PG. 480
INSERTS PG. 528
462
Powered by FlippingBook