LARGE DIAMETER BORING HEADS
O.D. TURNING MODULAR SLIDES & ADAPTERS FOR ROUGH PIN TURNING LARGE DIAMETERS RANGE: Ø2.283"-18.740"
The turning adapter with CKB5 connection can be mounted on a variety of extension slides to create your diameter. For rough pin turning, it is required to connect two SW 319 x CKB5 either directly to the turning adapter or by means of an extension to the adapter. The tool holder with CKB5 connection can be mounted on any extension slide. For OD turning it is required to connect the fine boring head EWN53-95CKB5 either directly or by means of an extension to the holder. To compensate the imbalance, a second tool holder and a special counter weight have to be mounted on the opposite side of the extension slide.
1
2
3
4
4
Insert Holder & Ranges
Assembly Position
1
3
2
Extension Slide
Turning Adapter
Boring Head
10.639.457 2.283-2.953 3.661-4.331 5.039-5.709 6.417-7.087 7.795-8.465 9.173-9.843 10.551-11.220 11.929-12.598 13.307-13.976 14.685-15.354 16.063-16.732 17.441-18.110
10.639.453 2.913-3.583 4.291-4.961 5.669-6.339 7.047-7.717 8.425-9.094 9.803-10.472 11.181-11.850 12.559-13.228 13.937-14.606 15.315-15.984 16.693-17.362 18.071-18.740
1 2 1 2 1 2 1 2 1 2 1 2
10.318.222
10.318.223
10.318.224
CB200CK5 (10.318.261) 2 Req'd
SW53-86CKB5 (10.319.501) 2 Req'd
10.318.225
10.318.226
10.318.227
Counter-clockwise spindle rotation required. ! CAUTION
ACCESSORIES
FLANGE ADAPTERS PG. 510
EXTENSION SLIDES PG. 510
518
Powered by FlippingBook