MEASURING INSTRUMENTS
BASE MASTER MINI For Lathe or Mill
For all cutting tools, workpieces and machine tools
Notifies via LED
All Supported All
• Standard height of .787" (20mm) • LED light for easy confirmation • Low measurement pressure corresponding to the blade diameter of Ø.1mm • Achieves measurement of the cutting edge position of small lathes
LED
Height Accuracy
+0.005mm 0 (+.0002" 0)
Repeatability
±1μm (.00004") Ø.1mm (.004")
Min. Tool Diameter Measuring Pressure
1N
LED
Stroke
2mm (.078")
Touch Signal
LED Illuminates (Green)
Battery
SR44 x 2
.453
1.319
Battery Life
10 Continuous Hours
1.772
Weight
.15 lbs.
.303
Catalog Number BMM-20H
Battery
Ø.157
Magnet
Ø.906
TOOL MASTER Non-Conductive Workpieces and Tools can Also be Measured Uses a large, easily read dial (with buzzer and LED), one-touch height adjustment mechanism and a firmly fixed powerful magnet.
For all cutting tools, workpieces and machine tools
Notifies via LED
Notifies via Buzzer
All Supported All
LED
Buzzer
Height Accuracy Min. Tool Diameter Measuring Pressure
100 +.02/0mm
Ø1.535 Ø1.654
Ø1mm
3N (at 100mm)
LED (red) LED (green)
Stroke
10mm
Stroke Range
92-102mm
LED
Lit (Green)
Around 100.5mm
Buzzer
"Beep"
Notification Signal
LED Flashing (Green/Red) Buzzer "Beep Beep Beep"
Buzzer
Around 99.5mm
Battery
Battery Weight
SR44 x 2
Magnet
2.2 lbs.
Standard Accessory
Setting Gage x 1P
2.157
Ø2.480
Catalog Number TM-100N
Min. Scale
.01mm ±15μm
• Dial gage accuracy conforms to JIS B7503:2015. • Model without magnets is available; if required, add /N at the end of the model number when ordering (Example: TM-100N/N)
Indicator Error Repeatability Return Error
Dial Gage Accuracy
5μm 5μm
652
Powered by FlippingBook