MEASURING INSTRUMENTS
3D MASTER RED Dial-Type Reference Position Measuring Instrument • Available for non-conductive workpieces • Measure X, Y & Z directions • Calculation of the stylus ball radius not required
For all cutting tools, workpieces and machine tools
All Supported All
Ø1.496 2.244 Ø.394 h6
2.362
Min. Scale
.01mm
.748
1.614
Repeatability
Within .01mm
XY Stroke Z Stroke
±4mm
4mm IP67
Protection Rating
Weight
1.3 lbs.
Accessory
Stylus ST25R-3DM
Carbide Ball
Catalog Number 3DM-10N
Standard Stylus ST25R-3DM
Ø4mm
ACCU CENTER Simple Mechanical Design for High-Precision Positioning • Just touch the stylus to the workpiece surface to complete measurement • Repeatability within 3μm (when used on vertical machines) • Hard chrome plated stylus for superior durability
Catalog Number ACCU-C104
Catalog Number ACCU-C10
.315
.571 3.09
1.102
1.417
1.417 .610
1.378
3.405
Not suitable for horizontal type machines. ! CAUTION
OPERATION INSTRUCTIONS
1
2
3
4
ø.394 (ø10mm) ø.157 (ø4mm)
Mount the ø10 straight part to a Milling Chuck or New Baby Chuck.
Press the stylus lightly with fingers to move off center and rotate at 400-600 RPM.
Touch the stylus to the workpiece; its runout will gradually decrease and it will seem to come to a stop.
Apply finer feed and keep the stylus in contact; it will begin to slide in one direction. Where it begins to slide, compensate the position by radius of the stylus 5mm (2mm) to detect the reference position.
653
Powered by FlippingBook