COLLET CHUCKS
MEGA E CHUCK CLAMPING RANGE: Ø.125"-.500" (Ø3-12mm) Exclusively for High Speed Finish End Milling
MAX 35,000 RPM
COOLANT
THROUGH
L
L 1
H
BCV No.
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
Weight (lbs.)
Ød
ØD
ØD 1
L
L 1
H
Collet
Nut
Wrench
BCV40-MEGA6E-3 BCV40-MEGA6E-4 BCV40-MEGA6E-5 BCV40-MEGA6E-6 BCV40-MEGA8E-3 BCV40-MEGA8E-4 BCV40-MEGA8E-5 BCV40-MEGA8E-6 BCV40-MEGA10E-3 BCV40-MEGA10E-4 BCV40-MEGA10E-5 BCV40-MEGA10E-6 BCV40-MEGA10E-8 BCV40-MEGA13E-3 BCV40-MEGA13E-4 BCV40-MEGA13E-5 BCV40-MEGA13E-6 BCV40-MEGA13E-8 BCV50-MEGA13E-4 BCV50-MEGA13E-5 BCV50-MEGA13E-6 BCV50-MEGA13E-8
1.09 1.25 1.45 1.50 1.28 1.46 1.55 1.69 1.48 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.65 1.90 2.07 2.25 2.42
3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 3.00 4.00 5.00 6.00 8.00 3.00 4.00 5.00 6.00 8.00 4.00 5.00 6.00 8.00
1.50 2.42 3.54 4.54 1.50 2.54 3.58 4.58 1.54 2.58 3.58 4.58 6.62 1.62 2.62 3.62 4.62 6.62 2.42 3.42 4.42 6.50
35,000 29,000 29,000 20,000 30,000 29,000 29,000 20,000 30,000 29,000 29,000 22,000 16,000 30,000 29,000 29,000 22,000 16,000 18,000 18,000 16,000 12,000
2.5 3.0 3.4 3.8 2.8 3.2 3.6 4.3 2.9 3.4 3.9 4.5 5.2 3.2 3.8 4.3 4.9 6.1 8.5 9.3
.125-.250 (3-6mm)
.984
1.45-1.77 MEC6-
MEN6 MGR25
.125-.250 (3-8mm)
1.181
1.65-2.00 MEC8-
MEN8 MGR30
.125-.375 (3-10mm)
1.378
1.89-2.28 MEC10-
MEN10 MGR35
.125-.500 (3-12mm)
1.654
1.96-2.36 MEC13-
MEN13 MGR42
.125-.500 (3-12mm)
1.654
1.96-2.36 MEC13-
MEN13 MGR42
10.6 12.8
• MEGA E NUT is included; collet, wrench and adjusting screw must be ordered separately • Weight includes nut but not collet • Center through coolant supply is available • Please note that the practical spindle speed may be considerably influenced by the machine rigidity and tool balance, when using, slowly ramp up to the appropriate speed starting from slow speeds • “H” indicates the adjustment length with an adjusting screw
ACCESSORIES
COLLET PG. 392
MEGA NUT PG. 393
PERFECT SEAL PG. 393
MEGA WRENCH PG. 402
SCREW PG. 423
70
Powered by FlippingBook