BASIC ARBORS
HIGH RIGIDITY SHELL MILL HOLDER HIGH RIGIDITY SH
COOLANT
THROUGH
L
L 1
L 2
L
L 1
1.89" (48mm)
L 2
1.77" (45mm)
L 3
BCV50H
BCV40H
L 3
Fig. 2
Fig. 1
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Weight (lbs.)
Fig.
ØD 1
ØD 2
ØD 3
L
L 1
L 2
L 3
W
G
BCV40H-SMC1.000-2 BCV40H-SMC1.250-2.5 BCV40H-SMC1.500-2.5 BCV50H-SMC1.500-4 BCV50H-SMC2.000-4 BCV50H-SMC2.500-3 BCV50H-FMH60-90
1.000 1.250 1.500 1.500 2.000 2.500
2.189 2.752 3.626 3.626
1.12 1.50 1.88 1.88 2.50 3.13
2.000
.22 .28 .38 .38
.38
.375 .500 .625 .625 .750
1/2"-20 5/8"-18 3/4"-16 3/4"-16
3.3 4.7 6.0
.69
1
2.500
.50
.93
15.2 19.4 16.6 20.0
4.000
.93
.50
1"-14 1"-14
2
4.874
.44
3.000
1.13 1.58
1.000
60mm 5.512
— 3.54
.44
— 1.000
M20 P2.5
• Cutter clamping screw is included • The weight does not include the cutter • If the provided clamping screw is not compatible, separately select one from the clamping screw table on pg. 425 •ØD 2 indicates the smallest mounting surface diameter of the cutter that can be mounted on the arbor; be careful when using a cutter with the mounting diameter considerably smaller than the cutting diameter, as it may not fit
H Type conforms to ASME B5.50-2015 standard for safe zone. Interference with tool changer may occur on machines made to an older standard. Consult engineering for specific information about the intended machine. ! CAUTION
83
Powered by FlippingBook