CHAMFER MILLS
C-CENTERING CUTTER—3 INSERT
NEW
COOLANT
Hole Chamfering Chamfering
THROUGH
Immediate Evacuation of Chips with Coolant Supply By providing coolant holes, it is possible to cool the cutting edge and immediately discharge the chips.
125
35
45º
H Min
Catalog Number
øD
øC Min
øC Max
H Min
Insert
ST32-CN1433-45-125
1.339
.551
1.299
.024
CN0906
NEW
• Wrench and screw are included; inserts tip is must be ordered separately • Centering is not possible
Insert Grade
Catalog Number
Insert Clamping Screw Set
øD
NEW
ACZ150
ACM250F
CN0906
S4S-15IP
.375
z
z
• Inserts are available in packages of 10 pcs. • Please clarify the insert model and grade when ordering (ex: CN0906-ACZ150) • 10 screws and 1 wrench are included with Insert Clamping Screw Set • It is recommended to regularly replace clamping screws and wrench to ensure the correct clamping force is maintained
CENTERING MICRO CUTTING DATA
This table is a guideline for selecting cutting parameters. Because it depends on the state of machine and work, please adjust in a timely manner. During chamfering of cross feed, dry cutting (including air blow) is recommended. However, when severe welding occurs on the cutting edge such as aluminum processing, please use water-soluble cutting oil.
Cutting Speed Vc (m/min)
Feed per Tooth fz (mm/flute)
Workpiece Material
Unalloyed Steel, Carbon Steel, Alloy Steel
50-150 50-120 70-200 100-300
Stainless Steel
.002-.008
Cast Iron/Ductile Cast Iron Aluminum/Non-ferrous
23
Powered by FlippingBook