KAISER FINE BORING HEADS
EWN BORING HEAD RANGE: ø.787"-8.000" A .0001"/ø vernier is added to the easy-to-read scale with .0005"/ø increments for enhanced precision. The pre-balance design ensures stable machining accuracy, and standard back boring capability expands versatility.
COOLANT
THROUGH
Back Boring
Insert Holder
Insert Holder
L 2
L 3
L
CK No.
.0005"/ø Scale .0001"/ø Vernier
L 1
Min Bore = B + (Back Boring Diameter / 2)
Boring
Back Boring
Catalog Number
Insert Holder ENH1-1 ENH1-2 ENH1-3 ENH2-1 ENH2-2 ENH2-3 ENH3-1 ENH3-2 ENH3-3 ENH4-1 ENH4-2 ENH4-3 ENH5-1 ENH5-2 ENH5-3 ENH6-1 ENH6-2 ENH6-3 ENH6-1 ENH6-2 ENH6-3 ENH6-1 ENH6-2 ENH6-3
Weight (lbs.)
CK No.
Insert
øD
L
L 1
øD
L 2
L 3
B
.787-1.024 .984-1.220 1.181-1.417 .984-1.299 1.260-1.575 1.535-1.850 1.260-1.654 1.614-2.008 1.969-2.362 1.614-2.162 1.969-2.480 2.402-2.913 2.087-2.756 2.559-3.228 3.071-3.740 2.677-3.937 3.701-4.961 4.646-5.906 3.937-6.024 4.961-7.047 5.906-8.000 3.937-6.024 4.961-7.047 5.906-8.000
—
EWN20-36E-CKB1
CK1
1.280 1.161
1.181-1.220 1.181-1.417
.413
.748
.394
.2
—
EWN25-47E-CKB2
CK2
1.398 1.280
1.417-1.575 1.535-1.850
.453
.827
.492
.3
TP08
—
EWN32-60E-CKB3
CK3
1.575 1.378
1.811-2.008 1.969-2.362
.394
.984
.630
.5
—
EWN41-74E-CKB4
CK4
1.850 1.693
2.087-2.480 2.402-2.913 2.441-2.756 2.717-3.228 3.071-3.740 3.150-3.937 3.701-4.961 4.646-5.906 4.409-6.024 4.961-7.047 5.906-8.000 4.409-6.024 4.961-7.047 5.906-8.000
.551 1.142 .787
1.8
EWN53-95E-CKB5
CK5
2.244 2.087
.748 1.339 1.004
1.8
EWN68-150E-CKB6
CK6
2.795 2.646
.866 1.780 1.280
3.8
TC11
EWN100-203E-CKB6
CK6
2.795 2.646
.866 1.780 1.791
5.4
EWN100-203E-CKB7
CK7
3.425 3.276
1.496 1.780 1.791
8.8
• Max and min diameters are the values when nose radius .008 is used for insert TP08, and nose radius .016 for insert TC11 • During back boring, the rotation direction will be reversed • Inserts and insert holders are not included; must be ordered separately
Select the same CK No.
The maximum allowable cutting speed Vc of the EWN BORING HEAD is 3,900 SFM, conditions differ according to the projection length of the holder and the rigidity of the machine. Set the spindle speed low and gradually increase until the optimum conditions are reached. ! CAUTION
ACCESSORIES
SHANK BCV PG. 92 BBT PG. 160
HEAD INSERT HOLDER
PG. 431
HSK PG. 220 PG. 249
BIG CAPTO PG. 277
SPARE PARTS PG. 482
INSERTS PG. 470
428
Powered by FlippingBook