ANGLE HEADS
AGU30 CLAMPING RANGE: ø.098"-.787" For Angular Operations
L
L 1
L 2
G G
Max F 2
ø3.819
M
R.709
Fig. 1
MAX 6,000 RPM
Fixed Length A .197 Pin Compression
L
L 2
L 1
G
G
Max F 2
ø4.921
Angle Adjustment by Aligning Divisions Spindle angle is easily adjustable from 0° to 30° using the scale indication on the body.
MAX 4,000 RPM
R.827
M
Fig. 2
.236 Collar Compression (#50 Only)
Fixed Length A .118 Pin Compression
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
Weight (lbs.)
Fig.
ød
øE G L
L 1
L 2
M P Q F 1
F 2
Collet
BCV40-AGU30/NBS13-250 BCV50-AGU30/NBS20-295
1 .098-.512 1.378 1.142 9.84 5.71 4.13 5.79 1.34 1.18 2.07 .55 NBC13- 2 .098-.787 1.811 1.437 11.61 6.50 5.12 6.38 1.77 1.54 2.56 .67 NBC20-
6,000 15.3 4,000 35.8
• Nut and wrench are included; collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • Automatic tool change may not be available depending on machine tool models • When supplied through the stop block, coolant can be ejected from the housing
A stop block is required. The rotation of the cutting tool is in same direction of the machine spindle. ! CAUTION
ACCESSORIES
COLLET PG. 358
WRENCH PG. 370
STOP BLOCK PG. 407
STOP BLOCK PG. 407
SETTING DISC (INCLUDED) For the precise adjustment of spindle angle or direction.
Clamp the Setting Disc Into the Angled Spindle
Check the Cutter Alignment and the Setting Angle
107
Powered by FlippingBook