ANGLE HEADS
AG90 (NBS TYPE) CLAMPING RANGE: ø.010"-.787"
MAX 6,000 RPM
K
L
L 1
L 2
G G
øE ød
ø3.819 ø4.921
M
R.709 (S=3.150) R.827 (S=4.331)
.236 Collar Compression
.118 Pin Compression
Fixed Length A
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Max RPM
Weight (lbs.)
ød
øE
G
K
L
L 1
L 2
M P
Q øF
Collet
BBT50-AG90/NBS6-215 BBT50-AG90/NBS6-245 BBT50-AG90/NBS6-275 BBT50-AG90/NBS6-305 BBT50-AG90/NBS10-215 BBT50-AG90/NBS10-245 BBT50-AG90/NBS10-275 BBT50-AG90/NBS13-215 BBT50-AG90/NBS13-245 BBT50-AG90/NBS13-275 BBT50-AG90/NBS20-230
8.47 9.65
2.17 3.23 3.35 4.41 4.53 5.59 5.71 6.77 2.17 3.23 3.35 4.41 4.53 5.59 2.17 3.23 3.35 4.41 4.53 5.59
27.8 28.2 28.7 29.1 28.7 29.5 30.2 28.9 29.8 30.4
.010-.236 .787 .827 .669
6.30
1.30 1.14 2.638 NBC6 6,000
10.83 12.01
8.47 9.45
.059-.394 1.181 1.181 .984
6.30
1.77 1.69 3.583 NBC10 6,000
10.83
8.47 9.45
.098-.512 1.378 1.220 1.102
6.30
2.05 1.77 3.976 NBC13 6,000
10.83
.098-.787 1.811 1.378 1.378 9.06 6.30 2.76 3.82 2.56 2.44 5.197 NBC20 3,000 31.3
• Nut and wrench are included, collet must be ordered separately • The angles of the locating pin to the drive key groove and direction of cutting edge are freely adjustable • A stop block is required when mounting on machines and must be order separately • When supplied through the stop block, coolant can be ejected from the housing • Automatic tool change may not be available depending on machine tool models • NEW BABY END MILL COLLETS cannot be used
A Stop Block is required. The rotation of the cutting tool is in reverse direction of the machine spindle (Speed Ratio 1:1). ! CAUTION
ACCESSORIES
COLLET PG. 358
WRENCH PG. 370
STOP BLOCK PG. 407
165
Powered by FlippingBook