ACCESSORIES
COOLANT PIPE (MONO BLOCK TYPE—FORM A/E)
Catalog Number
SW (mm)
øD
G
HSK25-CP HSK32-CP HSK40-CP HSK50-CP HSK63-CP HSK100-CP HSK125-CP
5mm 6mm 8mm
M8 P1
2.5mm
M10 P1 M12 P1
3mm 4mm 5mm 6mm 8mm
SW
G
10mm M16 P1 12mm M18 P1 16mm M24 P1.5 18mm M30 P1.5
10mm
!
CAUTION
Some machine tool builders may recommend the mono block type. Contact your machine builder and verify the proper style of coolant pipe to be selected. For machines capable of supplying coolant through the spindle, the coolant pipe should be fitted to all HSK holders to protect against accidental selection of coolant.
(1 º SWING TYPE—FORM A/E)
Catalog Number
Wrench (Optional)
øD
G
G
HSK40-CPM HSK50-CPM HSK63-CPM HSK100-CPM HSK125-CPM
8mm
M12 P1
CPW-40 CPW-50 CPW-63 CPW-100 CPW-125
10mm M16 P1 12mm M18 P1 16mm M24 P1.5 18mm M30 P1.5
!
CAUTION
DIN standard specifies ±1 degree of float. For proper installation, the special wrench is necessary. For machines capable of supplying coolant through the spindle, the coolant pipe should be fitted to all HSK holders to protect against accidental selection of coolant.
HSK PLUG SCREW
G
G
SW
SW
Fig. 1
Fig. 2
Catalog Number
Body Type
Fig.
G
SW
HSK-A25 HSK-E25 HSK-A32 HSK-E32 HSK-A40 HSK-E40 HSK-F63
HSK25-PG
1
M8 P1
4
HSK32-PG
1
M10 P1
5
HSK40-PG
• If HSK tool holders are used in a machine which does not recommend the center-through coolant, the plug screw should be mounted to our tools • HSK-F63-PG can only be used in original BIG DAISHOWA HSK-F63 tool holders; not compatible with other manufacturers
1
M12 P1
6
HSK-F63-PG
2
M9 P0.7.1855
4
250
Powered by FlippingBook