ACCESSORIES
CARTRIDGE (TURNING ADAPTERS) Double Clamp Type (For Negative Insert)
L
L
L
Fig. 1
Fig. 2
Fig. 3
Right Hand
Catalog Number
Clamp Piece
Weight (lbs)
Fig.
Insert
Hand øD 1
F
L T Max
Carbide Shim
e
B32-DDUNR-22032-11 B32-DCLNR-22038-12 B32-DTFNR-22038-16 B40-DDUNR-27032-15 B40-DCLNR-27038-12 B40-DTFNR-27038-16
1 2 3
DN1104 CN1204 TN1604
1.26
.16
93º 95° 91° 93° 95° 91°
CP7 CP2 CP1 CP2 CP2 CP1
DNS1104C CNS1204C TNS1604C
R 1.26 .87
.2
1.50
—
1 DN1506 (DN1504)
1.26
.24
DNS1506C (DNS1504C)
2 3
CN1204 TN1604
R 1.57 1.06
CNS1204C TNS1604C
.4
1.50
—
* Carbide shim for DN1506 (thickness 6.35mm) is included; when using DN1504 (thickness 4.76mm) inserts, replace with carbide shim DNS1504C (sold separately) • Wrenches and screws for the carbide seat are included • Wrench for tightening the clamp piece and inserts (standard ISO) must be ordered separately
Double Clamp To Secure The Insert Easy Attachment and Detachment of Insert
The double clamp pushes the insert downward. At the same time, a draw force is applied to the insert restraint surface. Secure insert clamping is achieved. The built-in spring makes it easy to attach and detach the insert. Loosen the clamp bolt one turn and lightly press the bridge with your finger, the tip of the bridge will pop up.
347
Powered by FlippingBook