COLLETS
MEGA ER25
MEGA ER32
Catalog Number
Clamping Range ød .413-.433 .433-.453 .453-.472 .472-.492 .492-.512 .512-.531 .531-.551 .551-.571 .571-.591 .591-.610 .610-.630 .630-.650 .650-.670 .670-.690 .690-.709 .709-.728 .728-.749 .750-.768 .768-.787
Catalog Number
Clamping Range ød .108-.118 .118-.128 .128-.138 .138-.148 .148-.157 .157-.167 .167-.177 .177-.187 .187-.197 .197-.207 .207-.217 .217-.226 .217-.236 .236-.256 .256-.276 .276-.295 .295-.315 .315-.335 .335-.354 .354-.375 .376-.394 .394-.413 .413-.433 .433-.453 .453-.472 .472-.492 .492-.512 .512-.531 .531-.551 .551-.571 .571-.591 .591-.610 .610-.630
Catalog Number
Clamping Range ød .108-.118 .118-.128 .128-.138 .138-.148 .148-.157 .157-.167 .167-.177 .177-.187 .187-.197 .197-.207 .207-.217 .217-.226 .217-.236 .236-.256 .256-.276 .276-.295 .295-.315 .315-.335 .335-.354 .354-.375 .376-.394 .394-.413
ERC32-11AA ERC32-11.5AA ERC32-12AA ERC32-12.5AA ERC32-13AA ERC32-13.5AA ERC32-14AA ERC32-14.5AA ERC32-15AA ERC32-15.5AA ERC32-16AA ERC32-16.5AA ERC32-17AA ERC32-17.5AA ERC32-18AA ERC32-18.5AA ERC32-19AA ERC32-19.5AA ERC32-20AA
ERC25-3AA
ERC32-3AA
ERC25-3.25AA ERC25-3.5AA ERC25-3.75AA
ERC32-3.25AA ERC32-3.5AA ERC32-3.75AA
ERC25-4AA
ERC32-4AA
ERC25-4.25AA ERC25-4.5AA ERC25-4.75AA
ERC32-4.25AA ERC32-4.5AA ERC32-4.75AA
ERC25-5AA
ERC32-5AA
ERC25-5.25AA ERC25-5.5AA ERC25-5.75AA ERC25-6AA ERC25-6.5AA ERC25-7AA ERC25-7.5AA ERC25-8AA ERC25-8.5AA ERC25-9AA ERC25-9.5AA ERC25-10AA ERC25-10.5AA ERC25-11AA ERC25-11.5AA ERC25-12AA ERC25-12.5AA ERC25-13AA ERC25-13.5AA ERC25-14AA ERC25-14.5AA ERC25-15AA ERC25-15.5AA ERC25-16AA
ERC32-5.25AA ERC32-5.5AA ERC32-5.75AA ERC32-6AA ERC32-6.5AA ERC32-7AA ERC32-7.5AA ERC32-8AA ERC32-8.5AA ERC32-9AA ERC32-9.5AA ERC32-10AA ERC32-10.5AA
øA=1.26 (32mm) B=1.58 (40mm)
øA=.98 (25mm) B=1.34 (24mm)
• BIG’s ERC collets have a maximum clamping capacity of .020/ø (.5mm/ø) • To obtain the best runout accuracy and rigidity, ERC collets for smaller tools have a reduced clamping range • For best results, users should avoid clamping tools with shank diameters less than the recommended clamping range
Conventional DIN collets have a clamping range of 1mm/ø. Never use ERC collets for more than .020/ø (.5mm/ø) below nominal size. To maintain the accuracy of the tool assembly, do not use collets and nuts manufactured by another company with the chuck body of BIG’s MEGA ER GRIP. We cannot guarantee the accuracy stated for our collets if they are assembled on the chuck body of another manufacturer. ! CAUTION
373
Powered by FlippingBook