STOP BLOCKS
SEMI-FINISHED STOP BLOCK A semi-finished stop block has the proper groove form for use with AIR POWER SPINDLE, HIGH SPINDLE and Hi-JET HOLDER, as well as additional material to allow the customer to machine the block to the correct height. If a pre-made stop block is unobtainable from the machine tool builder, a semi-finished stop block can be used. Please consult with the machine tool builder for selection, machining, and mounting of the semi-finished stop block.
ANGLE HEADS (S=4.331)
2.559 2.953 3.543
Catalog Number SB-G/E
• Area marked indicates heat treatment (HRC45-50), all other surfaces can be milled • Adjustment to the required height by milling the base • Fix the stop block by inserting two dowel pins (ø1/4)
1.772
U1/4-20 Cap Bolt
ø1/4 Pin
1.181 1.102
30º
.894
ø.413
ø.276
+0º -15º 10º Gaging
PT1/8
ø.268
3.150
2.362 2.953 2.126
1.063 1.063
U5/16-18 Cap Bolt
.591
.591 1.181 .787 .984
ø1/4 Pin
.772 .709
+0º -15º 10º Gaging
1.772
.591
PT1/4
.709 .772
+0º -15º 10º Gaging
PROFIT MAKER
Catalog Number SB-H40
PT1/4
PROFIT MAKER (S=2.559, 3.150)
• Area marked indicates heat treatment (HRC45-50), all other surfaces can be milled • For use with most Haas 40 taper machines
Catalog Number SB-F
• Area marked indicates heat treatment (HRC45-50), all other surfaces can be milled • Fix the stop block by inserting two dowel pins (ø1/4) • Stop block SB-F is not height-adjustable
408
Powered by FlippingBook