KAISER ROUGH BORING HEADS
E TYPE FOR BLIND HOLES (TO SHAPE FLAT SURFACES)
L 1
Belleville Spring Set (Spare)
Catalog Number
Clamp Bolt Set (Spare)
Weight (lbs.)
0°
CK No.
Cartridge
L 1
øD
L 2
A
CK No.
.787-1.024 .984-1.220 .984-1.299 1.260-1.575 1.260-1.654 1.614-2.008 1.614-2.126 2.087-2.598 2.087-2.756 2.717-3.386 2.678-3.543 3.465- 4.331 3.858-4.961 4.921-6.023 3.858-4.961 4.921-6.024 5.827-6.929 6.890-8.000 5.827-6.929 6.890-8.000
SW2026E SW2531E SW2533E SW3240E SW3242E SW4151E SW4154E SW5366E SW5370E SW6986E
.2 .2 .4 .4 .7 .7
SW20-31CKB1
CK1
1.280 1.283
SW20SS
SW20BS
SW25-40CKB2
CK2
1.398 1.402
SW25SS
SW25BS
.008
SW32-51CKB3
CK3
1.575 1.579
SW32SS
SW32BS
Balance Cutting
1.1 1.1 1.8 2.0 3.5 4.0 6.2 6.6 8.4 9.0 8.0 8.4
SW41-66CKB4
CK4
1.850 1.858
SW41SS
SW41BS
L 2
SW53-86CKB5
CK5
2.244 2.252
SW53SS
0º
SW53BS
SW6890E SW88110E SW98126E SW125153E SW98126E SW125153E SW148176E SW175203E SW148176E SW175203E
CK No.
SW68-110CKB6
CK6
2.795 2.803
SW68SS
.016
SW98-153CKB6
CK6
2.795 2.083
SW98-153CKB7
CK7
3.425 3.433
SW98SS
SW98BS
Step Amount A
SW148-203CKB6
CK6
2.795 2.803
Step Cutting
14.1 14.6
SW148-203CKB7
CK7
4.606 4.614
• Clamping screws and belleville springs are included; cartridges and inserts must be ordered separately • Compatible set items are not included ordered separately if required • Coolant through is standard for all the SW heads • The diameter range is the value when nose radius .016 is used for insert SC/CC06, and nose radius .031 for insert SC/CC09 and SC/CC12 • Cartridge models with are also available for longer cutting edge inserts; change the end of the model number from E to EL when ordering; for detail see page 420
N TYPE FOR BLIND HOLES (6 CORNERS OF THE INSERT CAN BE USED)
L 1
Belleville Spring Set (Spare)
Catalog Number
Clamp Bolt Set (Spare)
Weight (lbs.)
øD
CK No.
Cartridge
L 1
L 2
A
0°
CK No.
1.260-1.654 1.614-2.008 1.614-2.126 2.087-2.598 2.087-2.756 2.717-3.386 2.678-3.543 3.465- 4.331 3.858-4.961 4.921-6.023 3.858-4.961 4.921-6.024 5.827-6.929 6.890-8.000 5.827-6.929 6.890-8.000
SW3242N SW4151N SW4154N SW5366N SW5370N SW6986N SW6890N SW88110N SW98126N SW125153N SW98126N SW125153N SW148176N SW175203N SW148176N SW175203N
.7 .9
SW32-51CKB3
CK3
1.575 1.579 .008
SW32SS
SW32BS
1.1 1.1 2.0 2.2 3.7 4.2 6.4 6.8 8.6 9.3 8.2 8.6
SW41-66CKB4
CK4
1.850 1.858
SW41SS
SW41BS
SW53-86CKB5
CK5
2.244 2.252
SW53SS
Balance Cutting
SW53BS
SW68-110CKB6
CK6
2.795 2.803
SW68SS
L 2
.016
SW98-153CKB6
CK6
2.795 2.083
0º
CK No.
SW98-153CKB7
CK7
3.425 3.433
SW98SS
SW98BS
SW148-203CKB6
CK6
2.795 2.803
14.3 14.8
SW148-203CKB7
CK7
4.606 4.614
Step Amount A
• Clamping screws and belleville springs are included; cartridges and inserts must be ordered separately • Compatible set items are not included ordered separately if required • Coolant through is standard for all the SW heads • The diameter range is the value when nose radius .031 is used for insert ZN05 and ZN08
Step Cutting
417
Powered by FlippingBook