KAISER ROUGH BORING HEADS
TW BORING HEAD (STANDARD TYPE) RANGE: ø7.874"-32.677" CK7 large-diameter boring series for heavy cutting.
COOLANT
THROUGH
L
4.606
Coolant Nozzle
.866 1.772 1.969
Insert
CK7
Cartridge
Clamp Base
Flange
R
Slide
SPINDLE SYSTEM DUAL CONTACT
Cartridge Type
øD
Insert
CK7
Weight (lbs.)
Weight (lbs.)
Clamp Base (2-piece Set)
Weight (lbs.)
Cartridge (2-piece Set)
Weight (lbs.)
Flange
Slide
SLN200-270 SLN270-340 SLN340-410 SLN410-480 SLN480-550 SLN550-620 SLN620-690 SLN690-760 SLN760-830 SLN200-270 SLN270-340 SLN340-410 SLN410-480 SLN480-550 SLN550-620 SLN620-690 SLN690-760 SLN760-830
7.874-10.630 10.630-13.386 13.386-16.142 16.142-18.898 18.898-21.654 21.654-24.409 24.409-27.165 27.165-29.921 29.921-32.677 7.874-10.630 10.630-13.386 13.386-16.142 16.142-18.898 18.898-21.654 21.654-24.409 24.409-27.165 27.165-29.921 29.921-32.677
8.4
12.1 15.9 19.0 23.4 27.1 30.9 34.6 38.4
TW200A
FLN135 (FLN135/90)
6.1
6°
A Type for Through-Holes
CB-TW200E
4.0
1.6
SC12
FLN220 (FLN220/90)
8.8
8.4
TW200E TW200EL
12.1 15.9 19.0 23.4 27.1 30.9 34.6 38.4
FLN135 (FLN135/90)
6.1
0°
CC12 (TW200E) CC16 (TW200EL)
E/EL Type for Blind Holes
CB-TW200E
1.6
4.0
FLN220 (FLN220/90)
8.8
• Clamp Bases and Cartridges are sold as a two-piece set; the weight in the table is that of 2 pieces • Inserts must be ordered separately • Center-through coolant supply is available, except for marked models • Cutting edge and drive keys are aligned in the same direction (It becomes 90° offset when the FLN135/90 or FLN220/90 flange is used)
ACCESSORIES
Select the same CK No.
SPARE PARTS PG. 482
INSERTS PG. 470
SHANK
FLANGE
HSK PG. 220 PG. 249
BIG CAPTO PG. 277
BCV PG. 92 BBT PG. 160
SLIDE
CLAMP BASE
CARTRIDGE
424
Powered by FlippingBook