KAISER FINE BORING HEADS
EWN2-54/EWE2-54 (CENTRIC BORING BAR TYPE) RANGE: ø.039"-2.126" Features abundant range of tools capable of small-diameter deep boring.
COOLANT
THROUGH
Max Tool Insertion Amount=3.425
1.772
CK6
EC1605
CARBIDE BORING BAR
W PG. 441
REDUCTION SLEEVE
X PG. 446
A=7.787-2.362 3.346
3.937
WC02
ST05W-EB6-60 ø.236-.295
ST16-SL5
2.756
A=.630
EC03
EWN2-54EM-CK6 Stroke 0"-.177"
ST06W-EB4-16 ø.157-.197
2.953
3.937
A=.757
• Center-through coolant pressure should not exceed 4MPa
ST06W-EB5-20 ø.197-.236
ST16-SL6
A=1.063-2.559 3.740
3.937
WC02
ST06W-EB7.5-65 ø.295-.354
2.953
ST16-SL8
JIG BORING CUTTER, 8 Models
W PG. 441
Max Tool Insertion Amount=3.346
3.937
ø.039-.354
1.772
CK6
2.953
• Use with a Side Lock Holder and Reduction Sleeve or Straight Collet
ST16-SL10
STRAIGHT COLLET
X PG. 446
BORING BAR
A=.787-1.575 2.559
EC1606
INSERT HOLDER
TP08
M5xP.8
ST08-M5-40
EWE2-54CK6 Stroke .020"-.098"
.709
A=.787-2.559 3.543
EB09N ø.354-.413 EB10.5N ø.413-.472
ST08W-M5-65
EC1608
A=.787-3.150 4.134
ST08W-M5-80
A = Projection Length
A=.984-1.969 2.953
M6xP1
ST10-M6-50
EC1610
3.937
Always observe the projection length range and tool insertion limit. Use outside these ranges may result in damage to the boring head or slippage of the bar shank
.906
A=.984-2.953
EB12N ø.472-.551
ST10W-M6-75
4.724
A=1.378-3.740
Made of Carbide
ST10W-M6-95
444
Powered by FlippingBook