CHAMFER MILLS
C-CUTTER MINI Modular system allows front and back chamfering of deep holes.
BCV/BBT, HSK BIG CAPTO
CKB C-CUTTER MINI
EXTENSION
L
H 2 Min H 1 Min
CK No.
Front and back chamfering of grooves and steps located at a distance.
Front and back chamfering of deep holes
Chamfering Dia.
Catalog Number
Face Milling
H 1 Min
H 2 Min
Insert Model
No. of Inserts
Weight (lbs.)
CK. No.
øDc
øD 1
L
øC Min
øC Max
CKB1-C2232-45B-20 CKB3-C3242-45B-20 CKB3-C5262-45B-20 CKB4-C4252-45B-20 CKB5-C5262-45B-20 CKB6-C6575-45B-20
1.287 .748 1.681 1.220 2.469 1.220
.787
.866
1.260 1.654 2.441 2.047 2.441 2.953
.012
.488 CM10C1
4 4 6 6 6 8
.1 .3 .5 .5 .9
CK1
z
1.260 2.047 1.654 2.047 2.559
.787
.012
.488 CM10C1
CK3
z
2.075 1.535 .787 2.469 2.008 .787 2.980 2.520 .787
.012 .012 .012
.488 CM10C1 .488 CM10C1 .488 CM10C1
CK4 CK5 CK6
z
z
1.6
z
• Wrench and screws are included; inserts must be ordered separately • When plunge cutting, chatter may occur due to increased cutting force, so please reduce the number of inserts to 1 or 2
INSERTS
Insert Grade
Insert Model
Nose Radius
Insert Clamping Screw Set
øD
ACP200 ACP300 CWS20A ACM250F DS20
NF15KA
CM10C1
— —
z
z
z
z
z
.394 .008
S4S-T15
CM10C1SE
—
—
—
—
z
• Inserts are available in packages of 10 pcs. • Please clarify the insert model and grade when ordering (ex: CM0402(ACP300)) • 10 screws and 1 wrench are included with insert clamping screw set • It is recommended to regularly replace clamping screws and wrench to ensure the correct clamping force is maintained • SE in the Insert Model means Sharp Edge Type
45º
øD r
1
Insert Classifications
ACP200/ACP300
CWS20A
ACM250F
DS20
NF15KA
For all steel & stainless steel materials Multi-layer PVD coating on carbide base with nanoscale TiAIN & AICrN. Excellent performance and wear resistance.
For hardened steel
For stainless steel
For aluminum & / non-ferrous materials
For cast iron
Significantly improved toughness while maintaining hardness. Uses a tough carbide base material. AlTiSiN abrasion resistance due to the super multi-layered thin film structure of the system. Excellent PVD coated carbide.
PVD-coated carbide with excellent smoothness and resistance to welding and chipping, due to the ultra-multilayered thin film structure made of AITiN and TiAICrN
DLC coating on carbide base with very smooth surface for a low coefficient of friction. Excellent performance against built-up edge.
Adopts K15-equivalent carbide material with hardness & toughness for cast iron.
459
Powered by FlippingBook