MEASURING INSTRUMENTS
BASE MASTER MINI (ULTRA-THIN TYPE) • Cutting edge position measuring device with a reference height of 10mm • Ultra-compact design considering tool interference prevention • High brightness LED (green) lights to instantly detect the reference point
For all cutting tools, workpieces and machine tools
Notifies via LED
All Supported All
LED
Strap Hole
LED
10 +.01mm 0
Height Accuracy
Repeatability
±1μm (.00004") ø.1mm (.004")
Min. Tool Diameter Measuring Pressure
1N
ø.197 Measuring Surface (Ceramic)
Stroke
1mm (.039")
Battery
Touch Signal
LED Illuminates (Green)
Battery Cap
Battery
CR1620x1
Catalog Number BMM-10H
Battery Life
10 Continuous Hours
2.362
Weight
.12 lbs.
• Batteries not included; use batteries commercially available on the market
BASE MASTER MINI Electronic detection of the cutting edge position. Repeatability ±1μm (.00004").
For all cutting tools, workpieces and machine tools
Notifies via LED
All Supported All
LED
Loupe (5x Magnification)
ø.669
ø.197 (Measuring Surface)
Protective Cover
40 +.005mm 0
Height Accuracy
Repeatability
±1μm (.00004") ø.1mm (.004")
LED
Min. Tool Diameter Measuring Pressure
Battery
1.8N
Stroke
2mm (.078")
Magnet
Touch Signal
LED Illuminates (Blue)
Battery
LR43×2
Catalog Number BMM-20D
ø.787
With Protective Cover Attached
Battery Life
40 Continuous Hours
Weight
.12 lbs.
• Wrench for battery cap is included • Batteries not included; use batteries commercially available on the market • Model without magnets is available; if required, add /N at the end of the model number when ordering (Example: BMM-20D/N)
568
Powered by FlippingBook