HYDRAULIC CHUCKS
HYDRAULIC CHUCK (SUPER SLIM TYPE) CLAMPING RANGE: ø.250"-.500" (ø6-12mm) For Drills, Reamers, Ball Mills, End Mills, Diamond Reamers & Grinding Tools
COOLANT
THROUGH
E
ACCESSORIES
BCV No.
L 1
L 2
L
GRIP BAR PG. 393
R
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Min Clamping Length E
Max RPM
Weight (lbs.)
ød
øD
øD 1
øD 2
L
L 1
L 2
BCV40-HDC.250S-5 BCV40-HDC.375S-5 BCV40-HDC.500S-5 BCV40-HDC6S-125 BCV40-HDC8S-125 BCV40-HDC10S-125 BCV40-HDC12S-125 BCV50-HDC6S-150 BCV50-HDC8S-150 BCV50-HDC10S-150 BCV50-HDC12S-150
.250 .375 .500
.56 .75 .87
1.03 1.99 1.30
2.24
3.32 3.36 3.44 3.34
.99
30,000 28,000 28,000 30,000 30,000 28,000 28,000 20,000 20,000 20,000 20,000
2.8 3.0 3.1 2.9 2.9 3.1 3.1 7.7 7.9 7.9 8.1
1.30 1.42
5.00
2.06
6mm .551 8mm .669 10mm .748 12mm .827 6mm .551 8mm .669 10mm .748 12mm .827
1.75
1.024 1.102 1.181 1.260 1.024 1.102 1.181 1.260
2.24
.99
1.18 1.26 1.38
4.92
3.38
2.05
3.42
2.24
.99
3.54
1.18 1.26 1.38
2.75
5.91
2.05
3.66 3.74
• Adjusting screw cannot be used
(JET COOLANT TYPE) CLAMPING RANGE: ø.250"-.500" Coolant Holes Through Body of Holder
COOLANT
Jet Through
THROUGH
E
L 1
R
L
SPINDLE SYSTEM DUAL CONTACT
Catalog Number
Min Clamping Length E
Weight (lbs)
ACCESSORIES
ød
øD
øD 1
øD 2
L
L 1
BCV40-HDC.250J-4 BCV40-HDC.375J-4 BCV40-HDC.500J-4
.250 .375 .500
.79 .95
1.06 1.22 1.34
2.50 2.54 2.57
.99
2.7 2.8 2.9
1.75
4.00
1.30 1.42
GRIP BAR PG. 393
1.07
• Adjusting screws cannot be used
Use only cutting tools that have a shank tolerance of h6 (see table pg. 26). Do not use with cutting tools made with a flat on the shank (ie: Weldon type shank). Roughing end mills are not recommended for use with hydraulic chucks. Do not tighten the clamping screw without first inserting a cutting tool into the tool holder. Always insert the cutting tool into the hydraulic tool holder beyond min. clamping length “E”. ! CAUTION
78
Powered by FlippingBook