INDEXABLE END MILLS & FACE MILLS
FULLCUT MILL—FCM Type
SPEED FINISHER
High-Speed Cutter for Aluminum and Cast Iron Each cutting edge height is adjustable to within 1μm of each other.
Slot Milling • Shoulder Milling
R
SPINDLE SYSTEM DUAL CONTACT
Cutter Dia.: Ø.625"-2.000" Our end mills are designed for optimal efficiency and minimal cutting resistance. Our exclusive radial feed design combines sharp edges with rigidity, making it unmatched in performance.
Quick Adjustment of Cutting Edge Height After clamping the insert, the lifting screw lifts up the insert directly by revolving the lifting nut from the side. Simple construction aids in easy adjustment and the fine pitch thread of the lift screw ensures precise adjustment.
Machine: BBT40 (BIG-PLUS) Work Material: Carbon Steel Cutter Speed: 495 SFM Feed Rate: .004 IPT Cutting Conditions
HSK Integral Shank
BIG CAPTO Integral Shank
BIG-PLUS CAT & BT Integral Shank
.315"
.236"
.157"
.079"
Cylindrical Shank
Face Mill Cutter Dia.: Ø50/63/80/100mm
0
A B C (Conventional Design)
ø.787"
OTHER MANUFACTURER
Excellent Cutting Performance Even with #40 Taper Machine Tools
Excellent surface finish even under difficult cutting conditions.
Ad= .35"
Integral body with dual-contact system, Fullcut Mill Ø.787"
Ad= 9 mm
Machine Tool: BBT40 (BIG-PLUS) Cutter: Ø.787" Cutting Conditions Work Material: Tool Steel Spindle Speed: 2,400 RPM Cutting Speed: 480 SFM Feed Rate: .005 IPT
3.5 times greater cutting capability!
Lightweight and High Rigidity The cutter body has a low profile that improves rigidity and reduces vibration and distortion, resulting in a more even surface. Its lighter weight also benefits small machine tools like BT30 spindles, improving their performance.
CHATTERING
Ad= .10"
Other manufacturer’s cutter Ø.787"
0
.079 .157 .236 .315 .394
Axial depth of cut (in)
FULLCUT MILL—FCR Type
SURFACE MILL
45º Approach Face Mill Cutter Cutter Dia.: Ø80mm This mill is designed to achieve superior surface finishes. It was created using the C-CUTTER MINI chamfering tool platform and uses the same inserts.
Ramping • Helical Milling • Plunge Milling Slot Milling • Shoulder Milling
Cutter Dia.: Ø.750"-1.250" Innovative rigid insert enables powerful and stable ramping.
R
Plunge Milling
Shoulder Milling
Helical Milling
Ramping
SPINDLE SYSTEM DUAL CONTACT
Work Material: 1050 Steel Cutting Speed: 656 SFM Feed Rate: .008 IPT Axial DOC: .039" Radial DOC: 2.953" Coolant: Dry Cutting Conditions
SURFACE MILL
OTHER
BIG CAPTO Integral Shank
BIG-PLUS CAT & BT Integral Shank
HSK Integral Shank
Cylindrical Shank
Rz=1.42
Rz=9.04
20
Powered by FlippingBook