SPHINX DRILLS
MICRO DRILLS
HIGH PERFORMANCE DRILLS
Ø 3mm •15+ different standard article numbers •1,700 different standard micro drills available •Minimum diameter Ø.03mm •Standard diametrical tolerances as low as 0/-.004mm •Utilization of modern coatings designed specifically for micro tools •Ultra-fine flute surface finish Micro Tricut Drill Reamer •Ideal tool for drill reaming steels, short chipping stainless steels, titanium and cast iron •Ø3mm reinforced shank for all diameters •Three-flute geometry allows high feed rates •Excellent self-centering capabilities •Fine flute surface finish for optimal chip flow •Hole tolerances ranging from H7-H9 Deep Hole Drill • 20xd, 40xd, 60xd & 80xd for Ø.20/.40-1.50mm •Solid carbide •Ø3mm shank for all diameters •External coolant •Innovative AlCrN based coating intended specifically for micro tools
• Ø1.00-20.00mm •Lengths 3-30xd •Utilization of modern coatings suitable for most common and exotic materials •Internal coolant for most sizes •Most geometries can be reground and recoated to decrease cost per hole
Quadro Plus •6xd & 12xd standard flute lengths • Internal coolant for all sizes and lengths • Self-centering •Two cutting edges, four guiding edges •Highest performing drill in short chipping aluminum and cast iron •Straight flute design permits highest speeds and feeds •Best achievable size control of H7-H9
Phoenix TC2 •3xd, 6xd, 9xd, 12xd, 16xd, 20xd and 30xd standard flute lengths •Two margin modified Phoenix point geometry for optimal chip formation •Polished flutes and brushed cutting edges •Internal coolant for all sizes and lengths •AlCrTiN coated for ultimate wear resistance
Nirox •New hard coating with smooth surface for enhanced chip and coolant flow •Degressive helix angle •Point geometry designed for accurate and precise hole location •Unique margin geometry for optimum guidance •External coolant along the flutes
MICRO MILLS
ENGRAVING MILLS
End Mills • Ø.10-3.00mm
Deburring Mill – Lollipop • Ø1.00-6.00mm
Chamfering Mill – Noventa • Ø.80-6.00mm
Flat/Radius Tip • Ø.02-.15mm •Flat and radius tip • 30º, 40º, 50º, 60º & 90º standard point angles •0º helix
•Ø3mm or Ø4mm reinforced shank for all dia. •Useful in ISO P, M, K, S, N and O materials •Standard 2-flute and 3-flute geometries
•Geometry that prevents vibrations •Perfectly ground, round head (270º) •Depth up to 4xD possible
•Depth of up to 4xD •45º (90º included) •Access features smaller than 1mm
23
Powered by FlippingBook