MACHINE MAINTENANCE ACCESSORIES
LEVEL MASTER
DYNA CONTACT
LED & BUZZER INDICATION
The ceramic taper gage is for inspecting machine spindle tapers. With just a glance, it clearly displays Prussian blue, making it easy to identify any issues. This simple yet effective device is for any machine operator or technician looking to maintain the proper functioning of their equipment.
Device for the leveling of machine tool tables. •Simultaneous two-axis detection leveler •LED and buzzer indication when leveling is complete •Uses optical level sensor technology •10 micron per meter precision (.01mm/m)
WIRELESS TYPE Easy and quick leveling with a single operator.
Provided with an Aluminum Case
ATC ALIGNMENT TOOL
AL Shank In-machine tool spindle
DYNA FORCE
Regularly measuring the spindle retention force helps prevent unknown decreased rigidity, which can cause vibrations, lower machining quality, and shorten the lifespan of tools. A full-length taper stabilizes the value of measurements.
AL Flange In ATC arm
Only One Display for All Taper Sizes
Dial indicator stylus
For the maintenance of a machine tool spindle. Measure the misalignment between the ATC arm and the machine tool spindle or magazine pot center. How To Use 1. Load the AL Shank in the machine spindle and mount the AL Flange on the ATC arm. 2. Insert the AL Plug into the AL Flange. 3. Rotate the AL Plug and read the values of the dial indicator. This direction is the eccentric direction. Half of the gap of the values is the eccentric amount. 4. Adjust the position of the ATC arm so that the front end of the AL Plug will be inserted into the AL Flange fully.
AL Plug
50
40
30
測定器毎の感度校正登録が必要です。
It is necessary to calibrate each measuring device.
測定時はスイッチを「ＭＥＡＳ」に入れ、「ｋＮ」表示にしてください。 Select[MEAS] position and indicate [kN] on the display before starting measuring.
TYPE : DFA-1
Included: DYNA FORCE, Plastic Storage Case, Display and Cable
29
Powered by FlippingBook