KAISER ROUGH BORING HEAD
SWS BORING HEAD The KAISER SWS Boring Head is perfect for setups without a presetter. It allows for quick and effortless diameter adjustments, ensuring precision and efficiency every time. The two cartridges are connected to each other by the Synchro Setter, providing simultaneous diameter adjustment to both cartridges. Final diameter setting is possible using a simple measuring device, such as a micrometer or dial caliper.
Two Cartridges Adjust Simultaneously
Maximum Diameter
Minimum Diameter
Cartridges are linked by the Synchro Setter
Diameter Adjustment Using A Simple Measuring Device
2
E TYPE FOR BLIND HOLES (TO SHAPE FLAT SURFACES) RANGE: ø1.614"-4.331"
COOLANT
Select the same CK No.
THROUGH
CK SHANK
SWS HEAD SWS CARTRIDGE
L
0°
CK No.
SWS Cartridge (Sold Separately) Balance Cut Only; Step Cutting is Not Possible
Synchro Setter (Included)
Catalog Number
Synchro Setter (Spare)
Clamp Bolt Set (Spare)
Belleville Spring Set (Spare)
Weight (lbs.)
øD
CK No.
Cartridge
L
1.614-2.126 2.087-2.598 2.087-2.756 2.717-3.386 2.678-3.543 3.465- 4.331
SWS4154E SWS5366E SWS5370E SWS6986E SWS6890E SWS88110E
1.1 1.1 1.8 2.0 3.5 4.0
SWS41-66CKB4
CK4
1.850
SWS41SY
SW41SS
SW41BS
SWS53-86CKB5
CK5
2.244
SWS53SY
SW53SS
SW53BS
SWS68-110CKB6
CK6
2.795
SWS68SY
SW68SS
• Synchro setter, clamp bolt, and washer are included • Compatible spare products listed in the table are not included and must be purchased separately • Compatible cartridges and inserts are not included and must be purchased separately • All SWS heads have coolant holes as standard
• The machining diameter range is the value when using an insert with a corner radius of .031 • Not intended to be used as a fine boring tool for precision bores with tolerances less than +/-.004 • Step cutting is not possible • Cannot be used with SW cartridges
Powered by FlippingBook