ROTATING TOOLS
Mega Double Power Chuck Simultaneous fit is achieved on the nut as well as the taper shank to obtain rigidity close to an integral body. Clamping Capacity: ø.625" - ø.1.500"
L
H
BCV50
Coolant
Coolant bores in accordance to DIN69871/Form B
Model
ød
øD
øD 1
L
H
Wrench Max RPM Weight (lbs)
8.82 10.80 9.92 13.01 10.58 14.33 11.25 15.88 14.55
4.09 6.09 4.09 6.09 4.09 6.09 4.09 6.09 4.50
21,000 19,000 20,000 17,000 20,000 17,000 20,000 15,000 15,000
BCV50-MEGA.625DS-4 -6 -MEGA.750DS-4 -6 -MEGA1.000DS-4 -6 -MEGA1.250DS-4 -6 -MEGA1.500DS-4.5
MGR46
2.480
2.88
.625
1.811
MGR60
2.717
3.44
.750
2.362
MGR70
3.031
3.63
1.000
2.756
MGR80
3.386
4.22
1.250
3.150
MGR99
3.925
4.29
1.500
3.898
• Wrench must be ordered separately. • The “Max” allowable spindle speed listed in the table is directly influenced by the rigidity of the machine and balance of the cutting tool. Therefore, the “Max” allowable speed may not always be achievable. • Tools w/ flats should not be clamped w/ Mega Double Power Chuck.
Straight Collet (Type C)
MEGA.750DS
MEGA1.250DS
Clamping Size
Clamping Size
Model
Model
L
ød
ød
C.750-1/4
C1.250-1/4
.250 .312 .375 .437 .500 .562 .625
.250 .312 .375 .437 .500 .562 .625 .687 .750 .812 .875 .937 1.000
-5/16 -3/8 -7/16 -1/2 -9/16 -5/8
-5/16 -3/8 -7/16 -1/2 -9/16 -5/8 -11/16 -3/4 -13/16 -7/8 -15/16 -1
Inch Size
MEGA.750DS: D=.750, L=2.36 MEGA1.000DS: D=.750, L=2.70 MEGA1.250DS: D=1.250, L=2.91
Inch Size
C.750-6 -8
6.0 8.0
Metric Size
-10 -12 -16
10.0 12.0 16.0
MEGA1.000DS
C1.250-12 -14 -16 -20 -25
12.0 14.0 16.0 20.0 25.0
Clamping Size
Model
ød
Metric Size
C1.000-1/4 -3/8 -1/2 -5/8 -3/4
.250 .375 .500 .625 .750
Inch Size
9
Powered by FlippingBook