MEGA SYNCHRO TAPPING HOLDER
AVAILABLE IN BCV, BBT, HSK, BIG CAPTO & CKB
MGT 6-MGT 20 Tapping Range: No.2-AU 3 / 4 (ANSI) & M2-M20 (JIS/DIN/ISO)
47 bodies and 258 tap holders available to improve thread quality and tool life during rigid tapping. Reduces thrust loads caused by synchronization errors up to 90%. Super slim nuts and varied length tap holders provide optimal access to confined areas which eliminates the need for special length taps.
Coolant Through Center Capability for All Models Coolant is supplied both through the tool and to the tool periphery simultaneously.
Also available in straight shank & N/C Lathe type. See Pg. 15
Coolant is Supplied Through Both the Tool and Slits of the Tap Holder
MGT 36 Tapping Range: AU 7 / 8 -AU1 3 / 8 (ANSI) & M20-36 (JIS/DIN/ISO)
Coolant is Supplied Through Slits of the Tap Holder
MGT 3 Tapping Range: No.0-6 (ANSI) & M1-M3 (JIS/DIN/ISO)
Secure Drive The body and tap holder are fixed with a drive key in the rotation direction as well as the square of the tap.
-90 -68 -45 -22 0 22
Spiral Tap AU:1/4-20, N=1,000 RPM Spiral grooves on spiral tap cause loading in the reverse direction, similar to an end mill. * Measured by Kistler Dynamometer
BIG MEGA SYNCHRO ®
Approx. 13.2 lbs
BIG Mega Synchro reduces load to approx. 13.2 lbs. This is less than 1/10th of the load compared to a collet chuck.
-180 -160 -135 -110
Approx. 165 lbs of reversal load is applied to a tap held with a collet chuck.
Approx. 165 lbs Collet Chuck
Powered by FlippingBook