SFM
MILLING CHUCKS
UP TO 6,600 SFM
NEW HI-POWER MILLING CHUCK
MEGA DOUBLE POWER CHUCK
Clamping Range: ø.625"-1.500" (16-50mm) For heavy duty end milling. MAX 10,000 RPM Complete contact of nut and body achieves high rigidity, close to that of an integral tool to ensure heavy cutting without chatter. Notch free nut makes high speeds possible. MAX 16,000 RPM
Clamping Range: ø.500"-1.500" (12-42mm) For heavy duty end milling.
The thick wall body and high gripping force ensures high rigidity and stable performance. Fine and narrow slits in the body make the clamping part deform properly to ensure even and strong gripping force and stable runout. Now available in BIG-PLUS as standard. See PJC collets on Pg. 9 for reduction and coolant delivery options.
MAX 20,000 RPM
Powerful Clamping for Heavy Cutting
CONVENTIONAL MILLING CHUCKS
CONTACT
MAX 30,000 RPM
Thin wall
MAX 45,0 RPM
MAX 40,000 RPM
NEW!
Released
Tightened
HMCJ Type Clamping Range: Beginning at ø.500" (ø12mm)
Single roller
Uneven elastic deformation
Powerful Clamping Force Deflection test to compare with other manufacturer’s milling chuck proves that the Mega Double Power Chuck has achieved 1.4 times higher rigidity. MAX 50,000 RPM
Decreased runout accuracy and insufficient gripping force.
No escape route for oil film which causes processing failure. Remaining oil film reduces gripping power and may cause slip.
HMC12J
MGN13
MGN16
MAX 80,000 RPM
15 Stiffness (N/m)
0
5
10
1.4
HMC
BBT40-MEGA20D-75 MAX 120,000 RPM
Thick wall
1.0
Other manufacturer’s 40 taper milling chuck