CONTENTS
GENERAL INFORMATION
Cutting Data App / Insert Development
4
Important formulas
5
Taper standards
6
Rough boring with rough boring heads SW
7 - 8
Fine boring with fine boring heads EWN/EWE
9
Special applications with fine boring heads EWN/EWE
10
CUTTING DATA
Drilling
11
DV/BT40, HSK-A63, Capto C6
12 - 35
DV/BT50, HSK-A100, Capto C8
36 - 61
EWN 04-7, EWN 04-15
62 - 67
EWN 04-22, EWN/EWE 2-32
68 - 105
EWN/EWE 2-152
106 - 141
Application data for CBN and PCD inserts
142
On the following pages, tables with recommended speeds and feeds are provided. The values in these tables are the result of practical experience and specific tests. They serve as guidelines to help operators use BIG KAISER boring tools efficiently. For tools in the diameter range from 15 to 340 / 620 mm, there are different tables for the tool shank sizes DV40, BT40, HSK-A63, Capto C6 and DV50, BT50, HSK-A100, Capto C8. The tool shanks and the machines on which these tools are used, have a decisive influence on the rigidity and available drive power, which are especially important for heavy rough boring operations. In the smaller diameter range from 0.4 – 50 mm, there are different tables for the different sizes of the fine boring heads, with their specific accessories, such as tool holders and boring cutters.
Every table has its specific colour. See table of contents.
3
Powered by FlippingBook