MULTI-AXIS SYSTEMS
5-AXIS REDUCTIONS AND SHIMS Clamp Workpieces with Limited Supporting Surfaces Used on the top of a base unit to provide additional height and/or clearance for certain applications. They are supplied with clamping knobs so they are ready to use out of the box. Reduce from Ø80-50mm to clamp workpieces with limited supporting surfaces. They are also offered in 25, 50 & 75mm heights and two hardnesses if modification is needed. SYSTEM 40 clamping knob and bolt are included.
REDUCTIONS
SHIMS
Catalog Number
Knob Type SBA SBB SBC SBA SBB SBC SBA SBB SBC SBA SBB SBC SBA SBB SBC SBA SBB SBC
Thread Size
Material State
Catalog Number
Height
Fig.*
Height
Fig.*
15.250.302 15.250.332 15.250.362 15.250.301 15.250.331 15.250.361 15.250.329 15.250.349 15.250.379 15.250.343 15.250.339 15.250.369 15.250.342 15.250.338 15.250.368 15.250.320 15.250.350 15.250.380
15.250.405 15.250.406 15.250.407 15.250.410 15.250.411 15.250.412 15.250.413 15.250.414 15.250.415 15.250.416 15.250.417 15.250.418 15.250.419
9
4 5 6
25
M12
Hard
1
14
5 1
50
M12
Hard
2
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
75
M12
Hard
3
7
25
M12
Soft
1
50
M12
Soft
2
*See pg. 85 • All dimensions are in millimeters
75
M12
Soft
3
*See pg. 85 • All dimensions are in millimeters
ADJUSTABLE REDUCTION
Catalog Number
Fig.*
15.255.101
8
*See pg. 85
84
Powered by FlippingBook