The Chip Blower and Chip Fan are automatic cleaning tools for cutting chips and coolant. Air pressure removes cutting chips and coolant.
CHIP BLOWER & CHIPFAN Automatic cleaning tools for cutting chips and coolant
CLEANERS
CHIP BLOWER Air pressure removes cutting chips and coolant • Reduce environmental impact • Improved machine utilization rate • Increased productivity • Can be used with vertical and horizontal machining centers
COOLANT
THROUGH
High-pressure washing with center-through coolant
Blows away cutting chips with powerful air pressure
ST20-CBL260 — 7,000 RPM
2
CLEANERS
Ø160 STEEL SHANK TYPE
Catalog Number
ST20S-CBL160
500 rpm (.5 sec)
1,000 rpm
2,000 rpm
Startup Spindle Speed*
(.5 sec)
(.5 sec)
Min. 6,000 Max. 9,000 rpm
Recommended Spindle Speed
Rotation Direction
Forward
Flange: Ø2.60
Distance to the Workpiece Surface to be Cleaned (with wing opened to maximum)
3.94-5.91"
Recommended Movement Feed
118-394 ipm
*The wing may open during ATC when it is used with an ultra-high speed ATC machining center
Ø260 & Ø330 STEEL SHANK TYPE
Catalog Number
ST20S-CBL260 ST20S-CBL330
500 rpm (.5 sec)
1,000 rpm
2,000 rpm
Startup Spindle Speed*
(.5 sec)
(.5 sec)
Min. 4,000 Max. 7,000 rpm
Min. 3,000 Max. 6,000 rpm
Recommended Spindle Speed
Rotation Direction
Forward
Distance to the Workpiece Surface to be Cleaned (with wing opened to maximum)
3.94-5.91"
Flange: Ø2.60
Recommended Movement Feed
118-394 ipm
*The wing may open during ATC when it is used with an ultra-high speed ATC machining center
Repair Kit Catalog Number
RK-CBL160 RK-CBL260 RK-CBL330
• Repair kit contains 4x replacement blades, 4x springs and 4x pins • Additional springs are available in sets of 10x (CBL-SP-10P)
! CAUTION
• Startup Spindle Speed — In recent high-speed machining centers, the machine spindle rotation rise has become faster. A sudden command for spindle speed may create a strong impact on the wing as it opens; therefore, be sure to rotate it at the startup speed in the table above before raising it to the designated spindle speed. • The spindle speed and the distance to the workpiece surface in the above table differ depending on the weight of the cutting chips. Be sure to confirm before use.
• The wing may open during ATC when it is used with an ultra-high speed ATC machining center. • When supplying coolant with center through, be sure to stop the spindle rotation first. • This product must be used only with a machine with a full cover. • Never modify this product in any way. • The dedicated spring must be replaced after about 20,000 use cycles. S end back the unit for replacement through your supplier.
• Although the wing is made of high-strength carbon fiber reinforced resin, it may be worn out or damaged due to the collision of cutting chips or impact when opening/closing. If wear and damage progress, the wing may snap and fly out during use. Be sure to periodically check the damage of the wing visually and replace it as needed. Send back the unit for replacement through your supplier. Individual wings are not available for sale. • The cylindrical shank outer diameter of the chip blower is Ø20. Use a BIG NEW BABY CHUCK for the holder. Grasping with a holder with low inner diameter collapsibility is dangerous and must be avoided.
3
UP TO 3,900 SFM UP TO 6,600 SFM MAX 10,000 RPM
CLEANERS
CHIPFAN Chip & Coolant Fan! Fast, safe chip and coolant cleaning without stopping production. Your machine spindle spins the ChipFan blades to provide high-volume air cleaning power. • Coolant through • 12,000 RPM Max • Safe, fast method of removing chips and coolant • Balanced integral design for high speed • Made from high-strength aluminum with anodized coating for long life and durability • Quieter work environment
MAX 12,000 RPM
MAX 14,000 RPM COOLANT THROUGH
MAX 16,000 RPM
MAX 17,000 RPM
MAX 28,000 RPM
MAX 25,000 RPM
MAX 20,000 RPM
MAX 32,000 RPM
MAX 30,000 RPM
DIMENSIONS Shank: Ø.750" Blade: Ø4.92" Length: 2.36"
Catalog Number ST.750-CF125
MAX 33,000 RPM
MAX 38,000 RPM
MAX 35,000 RPM
MAX 45,000 RPM
MAX 40,000 RPM
MAX 50,000 RPM
MAX 60,000 RPM
MAX 80,000 RPM MAX 120,000 RPM MAX 6,000 RPM MAX 5,000 RPM MAX 3,000 RPM
OPERATING INSTRUCTIONS
• Use in enclosed machine centers • Install into a collet chuck • Rotation is clockwise • Optimum feed rate is 120-390 in/min
MAX 8,000 RPM MAX 4,000 RPM
MAX 2,000 RPM
2600 Huntington Blvd | Hoffman Estates, IL 60192 | P: (224) 770-2999 | F: (224) 770-2997 | bigdaishowa@us.bigdaishowa.com | bigdaishowa.com
Page 1 Page 2 Page 3 Page 4Powered by FlippingBook