SOFTWARE
The EWA-SYNC control software runs on Windows 7 or higher. An industrial PC is provided by BIG DAISHOWA. This software provides communication to the machine tool control via Ethernet and to the EWA fine boring head via Bluetooth ® . The Bluetooth ® connection is established thanks to a through-hole antenna directly connected to the PC, and mounted inside the working area of the machine tool. The control software synchronizes the machining process with the automatic tool adjustment by sending information from the machine tool to the EWA and vice-versa.
ADDITIONAL FUNCTIONS • Semi-automatic control of the EWA via adjustment data in the software
• Detailed information on error codes (e.g. battery low, tool blocked, etc.) • Reading log file of the EWA tool • Installation support functions
• EWA tool configuration • System configuration
SUPPORTED CONTROL SYSTEMS
Control Manufacturer
Supported Control System
Catalog Number
Models
Fanuc
Controls with FOCAS2
EWA-SYNC-FAN-STD
5
Heidenhain
All Systems with «Option18»
Heidenhain DNC, TNC640, TNC620, etc.
EWA-SYNC-HEID-STD
Machine Control Integration
Siemens
SINUMERIK with OPC-UA Server
SINUMERIK 1, SINUMERIK 828D, etc.
EWA-SYNC-SIEM-STD
Mazak
MAZATROL with API Option
EWA-SYNC-MAZ-STD
OSP-P100II, OSP-P200 and Newer OSP-P Controls
Okuma*
THINC-API
EWA-SYNC-OKU-STD
*Pending final validation. Market launch in 2024.
MAIN SCREEN ( UI )
Main screen with overview 1 Tool status with the maximum travel 2 EWA Tool settings including possibility of manual adjustment 3 Settings for the communication with the machine tool 4 Status of the machine tool incl. 5 Measured diameter of the probe & programmed diameter in the g-code 6 Error messages of the EWA systems 7 Operator settings
4
6 7
1
2 3
5
Powered by FlippingBook