TURNING TOOLS
Revolutionary The first modular tooling system for turning applications on MTCs (Mill-Turn Centers). This system offers improved efficiency, heat treatment, material selection, and optimal tool lengths. Replacing broken inserts is now a hassle-free and cost-effective process.
COOLANT
THROUGH
DUAL-CONTACT 90º RIGHT ANGLE STYLE TYPE F FOR MTC
DUAL-CONTACT 45º TILT STYLE TYPE S FOR MTC
Very Precise Locating Pilot
Locking Screw 2x
Orientation Pin
90º
45º
Face-To-Face Clamping
Clamp Bolts
Secure and Rigid Clamping Type S Cartridges are located in the basic holder by means of a precision ground pilot and secured by two opposing radial screws with a 15º taper. With a slight offset to locating sockets, high face-to-face clamping force of the two components is generated. To maintain precise locations and orientation, an additional locating pin is included for positive transfer of cutting torque.
Simple and Positive Clamping Type F uses two clamping bolts that press the cartridge onto the basic holder. The torque is transmitted by an interlocking drive slot.
Face Clamping
R
Safe and Easy Clamping of Inserts The double-clamping system simultaneously pushes an insert downward and draws it into the contact faces to achieve secure and rigid clamping.
R
SPINDLE SYSTEM DUAL CONTACT
SPINDLE SYSTEM DUAL CONTACT
Clamp Screw
Clamp Piece
Insert
Spring
Carbide Shim
BCV40/50 BBT40/50
C5/C6/C8
HSK-T50/63/100
Shim Screw
BCV40/50 BBT40/50
C5/C6/C8
HSK-T63/100
15 Cartridges for 45º Tilt Style Type S
24 Cartridges for 90º Right Angle Style Type F
This MTC turning tool program offers cartridges for right-hand, left-hand, and neutral use, as well as integral models. Additionally, square tool holders and boring bar holders are available.
This MTC turning tool program offers cartridges for right-hand and left-hand. Additionally, square tool holders and boring bar holders are available.
14
Powered by FlippingBook