Setup Instructions for Series 112 OD Turning

RE-POSITION THE TURNING ADAPTER Re-position the turning adapter back into the boring head, making sure to leave space between the boring head face and clamping bolts to avoid interference during fine adjustment​ Measure the final size on a tool presetter, or make a test cut. Adjust to final size with the Fine-Adjustment Dial and tighten the Tool-Carrier Clamping Screw. ​

Final size adjustment should result in only minimal offset of turning adapter from center position

Leave Space Here

Tool-Carrier Clamping Screw

Fine-Adjustment Dial​

BIG DAISHOWA Inc. 2600 Huntington Blvd | Hoffman Estates, IL 60192 | P: (224) 770-2999 | F: (224) 770-2997 | |

Powered by