RE-POSITION THE TURNING ADAPTER Re-position the turning adapter back into the boring head, making sure to leave space between the boring head face and clamping bolts to avoid interference during fine adjustment Measure the final size on a tool presetter, or make a test cut. Adjust to final size with the Fine-Adjustment Dial and tighten the Tool-Carrier Clamping Screw.
Final size adjustment should result in only minimal offset of turning adapter from center position
Leave Space Here
Tool-Carrier Clamping Screw
BIG DAISHOWA Inc. 2600 Huntington Blvd | Hoffman Estates, IL 60192 | P: (224) 770-2999 | F: (224) 770-2997 | firstname.lastname@example.org | bigdaishowa.com
Powered by FlippingBook