UNILOCK Modular Workholding System Vol 4

UNILOCK multi-axis workholding products are designed to provide flexibility and functionality for 5-axis machining and 5-sided machining via multiple-part transfers. We also offer solutions for machines with retrofit 4th/5th axis tables. BIG DAISHOWA can help you to maximize the benefits of your machine design through efficient workholding. These CNC workholding fixtures locate and stabilize the workpieces without obstructing access to the top and sides of the part. They also allow a clamped workpiece to be flipped into new orientations for subsequent machining operations without unclamping it from the workholding.

MODULAR WORKHOLDING SYSTEM VOL. 4

2

OVERVIEW & APPLICATION EXAMPLES

4-9

ROUND CHUCKS

10-25

PREASSEMBLED CHUCKS

26-37

KNOBS, BALLS AND PALLETS

38-51

MULTI-AXIS SYSTEMS

52-83

CHAIN CLAMPING

84-91

STABILIZER SYSTEM

92-99

ACCESSORIES & MAINTENANCE

100-109

3

OVERVIEW

HOW IT WORKS UNILOCK utilizes spring pressure to drive multiple clamping pins against a tapered clamping knob. Air pressure is used to compress the springs to back the clamping pins off of the clamping knob. This clamping process is achieved by bleeding the air pressure out of the chuck. To facilitate palletization, the clamping knob is attached to a base plate, fixture or directly to a workpiece. The result is quick and repeatable clamping. A hand locking version (no air required) is also available.

FEATURES • Clamping mechanism: heavy-duty die springs • Chuck opening: air pressure to compress springs • Clamping stability: low profile with matching taper wedges • Positional accuracy: adaptable to workpiece conformation • Unlocking air pressure: 75 PSI • Turbo assist clamping

SINGLE CHUCK APPLICATIONS The UNILOCK clamping knob mates with the central taper in the chuck to establish the centerline location (XY reference in a cartesian coordinate system). A timing pin or key locates in a notch or bushing to orient the coordinate system relative to XY and to restrict rotation. The Z reference in this same coordinate system is established by the bottom of the fixture or workpiece contacting the top ground surfaces of the chuck. These same mating surfaces (bottom of the fixture and top of the chuck) will control axial alignment. The clamping knob can be used for locking down a workpiece without influencing location if external features are used for positioning.

4

OVERVIEW

SBC KNOB DIAMETRAL CLEARANCES Type Metric Inch SBA .005mm .0002 SBB .005mm .0002 SBC .1mm .004 SBCC .3mm .012 SBCC .6mm .024 SBA = Establishes centerline SBB = Orients about centerline SBC = Clamp only, no positioning • See pg. 40 for more details on knob functions

MULTIPLE CHUCK APPLICATIONS UNILOCK is not restricted to one clamping knob. When the fixture or workpiece exceeds the work range of a single UNILOCK chuck, additional clamping knobs and chucks can be used to provide the necessary support and stability required for the process. There are only a few limiting factors as to the size of an array of chucks or in the weight of a workpiece. Undersized knobs provide clearance for large parts or out-of-position locations.

DESIGNED FOR MANUFACTURING During day-to-day use, chucks can be cleaned with compressed air. The fit between the clamping rams and the chuck body will not allow air pressure to push chips inside of the chuck. If you get chips in the clamping pocket, simply blow them out with an air gun. When open, the wedges completely retract. The one-to-one length-to-diameter ratio of the pocket is easily cleaned. There is no need for a vacuum. The 40mm tall by 40mm diameter clamping knob is extremely stable and can double as a foot when moving fixtures and workpieces around the shop. You will not need protective sleeves or special shelving when storing or transporting UNILOCK palletized fixtures or workpieces. Male and female threads are available in multiple sizes.

SELF-GUIDING DESIGN

23º

4.8mm

UNILOCK is designed to accept warped workpieces and fixtures. The shallow clamping pocket will allow a clamping knob to enter the chuck at an angle of up to 23 degrees. Undersized clamping knobs are also available. Standard and special UNILOCK clamping knobs will accommodate your out-of-position datums.

The radius on the smaller bottom diameter of the clamping knob addresses out-of-position loading conditions. When working with large workpieces that can warp, expand or contract, the knob can be used to help guide the clamping knobs to the center of the chuck.

5

OVERVIEW

PROCESS YOUR WAY TO SAVINGS Fixtures and workpieces are easily adapted to UNILOCK clamping knobs. Tremendous savings are available if the fixture or workpiece can be reoriented or transferred to machine additional features while remaining attached to the UNILOCK clamping components. On horizontal machines with columns, fixtures can be rotated 90 degrees or moved to the top. Transferring fixtured parts through as many operations as possible eliminates additional fixtures and clamping/unclamping time. Less clamping and unclamping of parts also reduces scrap and improves feature-to-feature accuracies.

TRANSFER WORKPIECES BETWEEN PROCESSES • Vertical machining cells • Horizontal machining cells • High-speed drilling and tapping centers

• Surface and cylindrical grinding cells • Horizontal and vertical lathes • Coordinate measuring cells

Once you grab the part, use UNILOCK to send it to as many operations as possible without removing the part from the fixture. UNILOCK positions and clamps from one face, leaving the other faces available for machining. Rotary tables, angle/sine plates and multi-sided tombstones facilitate part reorientation for subsequent operations.

The user can expand the operational envelope of any UNILOCK chuck by adding external timing features and support for the portion of the workpiece or pallet that falls outside of the top of the chuck.

6

OVERVIEW

WORKING SOLUTIONS IN MINUTES Table chucks are mounted to base plates and are ready to be clamped to your workstation. These chucks are supported by preassembled pallets. Shown below are the Mono, Duo and Quad table chucks, along with their pallets. Pneumatic kits are also available to install a working solution in minutes.

BUILD YOUR OWN CUSTOM SOLUTIONS UNILOCK components can be purchased individually for incorporation into your own custom designs.

7

APPLICATION EXAMPLES

SCHEDULING FLEXIBILITY AND SETUP VERSATILITY A Clamping System Flexible Enough to Change the Entire Table or Workpieces and Fixtures UNILOCK establishes predefined datums on all of your machines. When you load, lock and hit cycle start, there is no wasted time. A setup should always take the same amount of time. UNILOCK delivers scheduling flexibility and setup versatility. By using more than one chuck on a machine, you will be able to switch between multiple small parts or fewer large parts. Our predefined datums allow you to quickly and accurately convert your machining center from a headstock and tailstock setup to fixtures on the table.

USE IN ANY CONFIGURATION AND PROCESS Applications Are Endless – Limited Only by Your Imagination Align all of your rotary table fixtures in seconds. As you move away from the spindle nose, UNILOCK’s heavy-duty chucks will absorb the additional leverage and torque. Since individual UNILOCK components are sold separately, you can build specific solutions in-house or contact your tool and fixture provider. UNILOCK can be used in any configuration in almost any process. A heavy cut requiring six chucks to stabilize the part for machining can be accurately positioned on a coordinate measuring machine with two small chucks or a single chuck and a timing feature.

8

APPLICATION EXAMPLES

LARGE PARTS Save Money on Your Next Job

UNILOCK provides undersized clamping knobs so you do not have to hold .0004" on fixture locations when your production tolerance is .005". These undersized knobs are a necessity to mount knobs directly to warped or loosely toleranced workpieces. If you do not need to, or cannot hold a tight tolerance, simply select the appropriate undersized clamping knobs to accommodate the workpiece or fixture. UNILOCK’s heavy-duty clamping knobs are a necessity when you are using a hoist to load and unload your machine. With a length-to-diameter ratio of 1-to-1, UNILOCK’s 40mm clamping knob can be left on fixtures and workpieces without worry of damage during loading and unloading, storage or transfer. SBC KNOB DIAMETRAL CLEARANCES Type Metric Inch SBA .005mm .0002 SBB .005mm .0002 SBC .1mm .004 SBCC .3mm .012 SBCC .6mm .024

SBA = Establishes centerline SBB = Orients about centerline SBC = Clamp only, no positioning • See pg. 40 for more details on knob functions

SMALL PARTS Remove Process Time – Save More Than Just Setup Time Before UNILOCK, three subsequent machining processes required the operator to clamp and unclamp the part three times. Now the same part is only clamped and unclamped once for these same three processes. Even when the time spent clamping and unclamping the part is minimal, it creates unnecessary labor and a chance for errors. Use UNILOCK to immediately increase spindle uptime and decrease scrap due to part positioning and clamping errors. If a part has to be clamped and unclamped in a different fixture for each operation, considerable process time and money can be saved by leaving the part in the same fixture for as many operations as possible. This also eliminates expensive fixtures on subsequent operations.

Before UNILOCK After UNILOCK Set Up Production Set Up Production Savings

Operation

2 hours 9 hours 6 hours 18 hours

Op-10 Lathe 3 hours

4 hours

1 hour

4 hours 2 hours 8 hours

Op-20 Lathe 2 hours 10 hours 1 hour

Op-30 Mill

4 hours 11 hours 1 hour

Total

10 hours 25 hours 3 hours 14 hours

9

10

ROUND CHUCKS FITS A VARIETY OF APPLICATIONS ESM 138A

12-13

ERGO 138

14-15

EFM 138A

16-17

ASM 90A

18-19

ISM 160

20-21

ESM 176A

22-23

ESM 168

24-25

11

ROUND CHUCKS

ESM 138A Air-Assisted Clamping Turbo Chuck With an air assisted clamping turbo function. It also has improved retention force with a new slide wedge actuation. This is accomplished by covering the piston with a sealed cover plate.

FEATURES • Mid-sized diameter fits most applications • Top side mounting for ease of integration • Choose from air connections at bottom or side • Optional timing notch in face of chuck

• Same body and locating diameters • Same mounting bolt hole pattern • Same flange air port location • Same timing notch

Available with Notches

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Catalog Number

Notch (Width x Qty)

Weight (lbs)

Description

M10 M12 M16 M20† M24† Spring Only Turbo Assist Port Size Flange

15.270.140A 15.270.147A

ESM 138A

1,686

5,620

G1/8"

9.9

3 3 3 3 3

3

14 H7 x 1

ACCESSORIES

†Optional • Screws, screw covers and O-ring included

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

12

ROUND CHUCKS

14 H7 +.018 0

8

+.01 -.01

60.50

R4

Ø9 H7 +.015 0

Through All

G1/8" “Open” (Unclamp)

Ø121 B.C.

G1/8" “Turbo” (Clamp)

M8 SHCS (6x) (Included)

0 -.01

Ø138

9 f7

M8

Ø109.90

0 -.01

Ø110

Ø8x2 O-Ring Port “Confirmation” (Unclamp Confirmation)

Ø8x2 O-Ring Port “Turbo” (Clamp)

Ø8x2 O-Ring Port “Open” (Unclamp)

• All dimensions are in millimeters • Dimensions marked are for notch option

13

ROUND CHUCKS

ERGO 138 A Space Saving Chuck A chuck height of 28mm, a height savings of 11mm over the ESM 138 model.

FEATURES • Mid-sized diameter fits most applications • Top side mounting for ease of integration • Choose from air connections at bottom or side

• Same mounting bolt hole pattern • Same flange air port location • Increased inner support ring diameter • Knee locking mechanism

• Optional timing notch in face of chuck • Same body and location diameters

UNCLAMPED

CLAMPED

Available with Notches

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Catalog Number

Notch (Width x Qty)

Weight (lbs)

Description

M10 M12 M16 M20† M24† Spring Only Turbo Assist

Port Size Flange

15.270.110A 15.270.117A

ERGO 138

990-1,320 3,300-3,520

G1/8"

9.9

3 3 3 3 3

3

14 H7 x 1

ACCESSORIES

†Optional • Screws, screw covers and O-ring included

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

14

ROUND CHUCKS

14 H7 (9x)

Ø10 H7 Through All

G1/8" BSP Open Port (Ships Plugged)

M8 SHCS (6x)

G1/8" BSP Open Port (Ships Plugged)

0 -.001

Ø138

A

B

Ø110 0 -.01 Ø109.05

C

Detail A Scale 2:3 Ø8x2 O-Ring (Ships Plugged)

Detail C Scale 2:3 Air Cleaning (Ships Plugged)

Detail B Scale 2:3 Ø8x2 O-Ring (Ships Plugged)

M7

Ø12 M7

M7

Ø12

Open Port

M5 Port for Drain or Cleaning (Ships Plugged)

Turbo Port

• All dimensions are in millimeters • Dimensions marked are for notch option

15

ROUND CHUCKS

EFM 138A Suited For Thinner Walled Tombstones Flange mount chuck is easily mounted in custom fixtures due to the reduced projection height.

FEATURES • Mid-sized diameter fits most applications • Top side mounting for ease of integration

• Reduced projection height by mounting in fixtures • Optional timing notch in face of chuck

Available with Notches

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Catalog Number

Notch (Width x Qty)

Weight (lbs)

Description

M10 M12 M16 M20† M24† Spring Only Turbo Assist

Port Size Flange

15.263.100A 15.263.107A

EFM 138A

1,348

4,496

8.0

3 3 3 3 3

3

14 H7 x 1

ACCESSORIES

†Optional • Screws, screw covers and O-rings included

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

16

ROUND CHUCKS

Ø121

M8 Low Head SHCS (6x)

5 Ø10 H7 Through All 14 H7

0 -.01

Ø138

Ø109.7

0 -.01

Ø110

Ø7x1.5 O-Ring Port “Open” (Unclamp)

Ø7x1.5 O-Ring Port “Turbo” (Clamp)

• All dimensions are in millimeters • Dimensions marked are for notch option

17

ROUND CHUCKS

ASM 90A For Smaller Applications As one of the smallest chucks, the UNILOCK ASM 90A chuck is for use in small jobs without creating obstructions.

FEATURES • Reduced diameter for small work or tight spaces • Integrated toe clamp lip • Turbo option for increasing holding power

• Air supply from bottom or side of chuck • Optional reference notch in face of chuck

Available with Notches

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Catalog Number

Notch (Width x Qty)

Weight (lbs)

Description

M10 M12 M16 M20† M24† Spring Only Turbo Assist

Port Size Flange

15.240.090A 15.240.091A

ASM 90A

— — — 562

2,472

G1/8"

5.1

3 3

3

12 H7 x 1

ACCESSORIES

†Optional • O-rings included

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

18

ROUND CHUCKS

32.5 39

M5x.8 5.5

G1/8 "Open" (Unclamp) Shipped Plugged

G1/8 "Turbo" (Unclamp) Shipped Plugged

81 Ø 84.8

0 -.01

Ø90

B

A

Detail A Scale 1:1 Ø4x1.5 O-Ring (Ships Unplugged)

Detail B Scale 1:1 Ø4x1.5 O-Ring (Ships Unplugged)

Ø0

Ø0

M5x0.8 - 6H

10 (8x)

+.012 0

Ø5 H7

10 (2x)

• All dimensions are in millimeters • Dimensions marked are for notch option

19

ROUND CHUCKS

ISM 160 For the Face of 4th and 5th Axis Rotary Tables

A single chuck solution for the face of 4th and 5th axis rotary tables. Exterior timing features are comparable with the UNILOCK MCM 150 & UNILOCK MSM 170 chucks. Timing pin slot allows timing pin to match non-standard pallet sizes.

FEATURES • Simple surface mount design • Now available with A2-6 mounting • Dowel pins into location • Supports 60º and 90º t-slots

• Air-assisted clamping option • Low profile 46mm (1.811") • Through-hole eases cleaning • Multiple indexing options

Slot Allows for Variations in Radial Pin Location

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Catalog Number

Notch (Width x Qty) Ø14 H7 x 1 Ø12 H7 x 4

Weight (lbs)

Description

M10 M12 M16 M20† M24† Spring Only Turbo Assist

Port Size Flange

15.260.160

ISM 160

— — 1,100-1,540 3,300-3,740

G1/8"

12.1

3 3 3

3

15.300.008

ISM 160 (A2-6)

Ø12 H7 x 2

ACCESSORIES

†Optional • No hardware included

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

ADAPTER PLATE For ISM 160 to HAAS 160/210 Size Indexers and Trunnions

FEATURES • Replaces t-slot platter • Allows for both open and turbo • Low 20mm height

Catalog Number

Indexer Model

Description

15.260.164 15.260.166

HAAS 160 HAAS 210

ISM 160

• Other sizes available upon request • Please contact the BIG DAISHOWA Engineering Dept. for additional information

20

ROUND CHUCKS

60º

13 TYP

M5 Turbo Port Ø8x2 O-Ring (Ships Plugged)

M5 Open Port Ø8x2 O-Ring (Ships Plugged)

52.5

0 -.01

Ø162

0 -.005

46

15

14 H7

14

G1/8" BSP Open Port (Ships Unplugged)

Ø12 H7 (4x)

12 H7 Through All (2x)

22

G1/8" BSP Turbo Port (Ships Unplugged)

• All dimensions are in millimeters

21

ROUND CHUCKS

ESM 176A For Handling Heavyweight Fixtures Excels in handling heavyweight fixtures, due to its size and and higher retention force.

FEATURES • Flange design for top side mounting • Large diameter with turbo clamping for more rigidity

• Air supply from bottom or side of chuck • Optional reference notch in face of chuck

Available with Notches

Recommended Bolt Sizes

Clamping Force (lbs)

Air Connection

Catalog Number

Notch (Width x Qty)

Weight (lbs)

Description

M10 M12 M16 M20 † M24† Spring Only Turbo Assist

Port Size Flange

15.272.170A 15.272.171A

ESM 176A

2,023

8,992

G1/8"

17.5

3 3 3 3 3

3

25 H6 x 1

ACCESSORIES

†Optional • Screws, screw covers and O-rings included • Notched version comes with timing bushing and all hardware listed above

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

22

ROUND CHUCKS

M8 SHCS (6x)

G1/8" “Turbo” (Clamp)

Ø152 B.C.

G1/8" “Open” (Unclamp)

0 -.01

Ø176

+.01 -.01

76

6.2

Ø12 n6

Ø137.9

0 -.01

Ø138

Ø8x2 O-Ring Port “Open” (Unclamp)

Ø8x2 O-Ring Port “Turbo” (Clamp)

Ø8x2 O-Ring Port “Confirmation” (Unclamp Confirmation)

• All dimensions are in millimeters • Dimensions marked are for notch option

23

ROUND CHUCKS

ESM 168 Work Can Pass Through Chuck Can be used on the face of 4th and 5th axis rotary tables, lathes or mills where the center of rotation provides a through-hole to bury the workpiece.

FEATURES • Removable center cover

• Offers clamp/unclamp confirmation • Bolts into place from top side

• Work can pass through chuck • Air-assisted clamping option

Recommended Bolt Sizes

Clamping Forces (lbs)

Air Connection

Catalog Number

Notch (Width x Qty)

Weight (lbs)

Description

M10 M12 M16 M20 † M24† Spring Only Turbo Assist

Port Size Flange

15.500.168

ESM168

— — — —

2,248

8,992

G1/8”

14.3

3

3

ACCESSORIES

†Optional • Screws, screw covers and O-rings included • See pg. 44 for M74 option

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

24

ROUND CHUCKS

M8 SHCS (6x) (Included)

G1/8 "Turbo" (Clamp)

G1/8 "Open" (Unclamp)

B.C. Ø152

0 -.01

Ø168

Ø137.8

0 -.01

Ø138

9x1.5 O-Ring Port "Confimration 2" (Clamp Confirmation)

9x1.5 O-Ring Port "Open" (Unclamp)

9x1.5 O-Ring Port "Turbo" (Clamp)

9x1.5 O-Ring Port "Confimration 1" (Unclamp Confirmation)

• All dimensions are in millimeters • Dimensions marked are for notch option

25

26

PREASSMBLED CHUCKS PROVIDES EASY MOUNTING OF THE CHUCKS ERGO 138 PREASSEMBLED BASES 28-29 E100A 30 E200A 31 E300A 32 E400A 33-34 E600A 35 E800A 36 E1000A 37

27

PREASSEMBLED CHUCKS

ERGO 138 PREASSEMBLED BASES Preassembled Double Table Chucks Base stations with the ERGO 138 chuck save 11mm of height compared to ESM 138. Available with turbo out of the box.

FEATURES • Mid-sized diameter chuck fits most operations • Finish ground steel baseplate

• Predesigned solutions for up to 10 chucks • Optional timing notch in face of ERGO 138 chucks

Metric (mm)

Imperial (in)

Catalog Number

Number of Chucks

Page

Length

Width

Height

Length

Width 5.866 7.717 7.677 15.551 15.551 15.591 15.591

Height

15.270.370A 15.270.371A 15.270.372A 15.270.373A 15.270.374A 15.270.375A 15.270.376A

30 31 32 33 35 36 37

196 396 595 395 596 796 996

149 196 195 395 395 396 396

7.717

1 2 3 4 6 8

15.591 23.425 15.551 23.465 31.339 39.213

50

1.969

60

2.362

10

ACCESSORIES

• No hardware included • See pg. 14 for ERGO 138 chuck specifics

KNOBS PG. 40

AIR FITTINGS PG. 102

DUST COVERS PG. 106

REPAIR PG. 107

28

PREASSEMBLED CHUCKS

ERGO 138 — WELDING Four ERGO E600 bases are used to hold welding fixtures, allowing for the quick changeover of fixtures when the production changes from one series of parts to another. There is no need to retouch points between changes as the system repeatability of .005 μm (.0002") is greater then needed in most welding applications.

ERGO 138 — TIMING BLOCK The ERGO E100 base can be modified by the end user to accept a timing block allowing for the timing of smaller fixtures at 45° or 135°. The ERGO E100 V1 and V2 bases offers a 45° timing block mount with no modification. The V1 also has a single 14mm H7 timing notch. In all cases the block ( 15.270.331 ) is sold separately.

ERGO 138 E300 — ROUND, SPECIAL ITEM Special versions of round bases can be built to customer specifications. For assistance, please consult the BIG DAISHOWA Engineering Dept.

29

PREASSEMBLED CHUCKS

E100A

160 199

Ø6mm Tube Fittings (Inlcuded)

70

Ø138

G1/4 "Turbo" (Clamp)

G1/4 "Open" (Unclamp)

Ø12 H7 10 (2x)

Ø12 H7 6 (1x)

+.01 -.01

+.01 -.01

62.5

62.5

Catalog Number 15.270.370A

• All dimensions are in millimeters • For detailed information on additional mounting hole locations, please consult the BIG DAISHOWA Engineering Dept.

30

PREASSEMBLED CHUCKS

E200A

395

+.01 -.01 +.01 -.01

370

200

Ø14 H7 (5x) Through All

6mm Tube Fittings (Inlcuded)

33

Ø138

Ø138

G1/4 "Open" (Unclamp)

G1/4 "Turbo" (Clamp)

Catalog Number 15.270.371A

• All dimensions are in millimeters • For detailed information on additional mounting hole locations, please consult the BIG DAISHOWA Engineering Dept.

31

PREASSEMBLED CHUCKS

E300A

596

+.01 -.01

+.01 -.01

200

200

+.01 -.01

+.01 -.01

100

100

16

Ø14 H7 (4x) Through All

6mm Tube Fittings (Included)

Catalog Number 15.270.372A

G1/4 "Open" (Unclamp)

G1/4 "Turbo" (Clamp)

• All dimensions are in millimeters • For detailed information on additional mounting hole locations, please consult the BIG DAISHOWA Engineering Dept.

32

PREASSEMBLED CHUCKS

E400A

395

+.01 -.01

320

+.01 -.01

200

G1/4 Plugs (Inlcuded)

Ø14 H7 (5x) Through All

30

6mm Tube Fittings (Inlcuded)

Ø138

Ø138

G1/4 "Open" (Unclamp)

G1/4 "Turbo" (Clamp)

Catalog Number 15.270.373A

• All dimensions are in millimeters • For detailed information on additional mounting hole locations, please consult the BIG DAISHOWA Engineering Dept.

33

PREASSEMBLED CHUCKS

E400A The ERGO E400 base stations shown above are mounted together for a master reference system on the table of the machine. They are also pneumatically linked to operate in unison. The vise plate (left bottom) and the grid plate (right bottom) are easily swapped or removed entirely. Then, when needed, replaced within .0002" (.005mm) of their original location.

34

PREASSEMBLED CHUCKS

E600A

595

+.01 -.01

+.01 -.01

280

280

+.01 -.01

+.01 -.01

200

200

Ø6mm Tube Fittings (Inlucded)

50

172.5

Ø138

G1/4 "Open" (Unclamp)

G1/4 "Turbo" (Clamp)

Catalog Number 15.270.374A

• All dimensions are in millimeters • For detailed information on additional mounting hole locations, please consult the BIG DAISHOWA Engineering Dept.

35

PREASSEMBLED CHUCKS

E800A

796

Catalog Number 15.270.375A

+.01 -.01

+.01 -.01

+.01 -.01

200

200

200

Ø138

G1/4 "Open" (Unclamp)

G1/4 "Turbo" (Clamp)

The ERGO E800A preassembled bases shown with custom mounting holes to match the T-slot pattern of the customer’s machine. • All dimensions are in millimeters • For detailed information on additional mounting hole locations or base modifications,, please consult the BIG DAISHOWA Engineering Dept.

36

PREASSEMBLED CHUCKS

E1000A

996

+.01 -.01

+.01 -.01

+.01 -.01

+.01 -.01

200

200

200

200

Catalog Number 15.270.376A

Ø138

G1/4 "Turbo" (Clamp)

G1/4 "Open" (Unclamp)

The ERGO E1000A preassembled base shown with four customer-designed fixtures. Standard fixture pallets are available in either aluminum or steel and various sizes and thickness. See pg. 33. • All dimensions are in millimeters • For detailed information on additional mounting hole locations, please consult the BIG DAISHOWA Engineering Dept.

37

38

CLAMPING KNOBS PROVIDES HIGH ACCURACY LOCATION

OVERVIEW

40

SYSTEM 40 KNOBS

41-43

SYSTEM 25 KNOBS

44-45

SYSTEM 68 KNOBS

46

CLAMPING BALLS PROVIDES HIGH DEGREE OF FLEXIBILITY

5-AXIS STABILIZER BALLS

47-48

PALLETS PROVIDED FULLY ASSEMBLED

SYSTEM 40 PALLETS

49-51

39

KNOBS, BALLS AND PALLETS

CLAMPING KNOBS Can be attached to fixtures or directly to workpieces. Our standard knobs can be mounted in a blind hole from the bottom or pulled up from the top. Standard clamping knobs accept the following: OPTION 1: PASS-THROUGH BOLT – The bolt is inserted past the clamping knob and threads into the workpiece or fixture. OPTION 2: CAPTIVE SET SCREW – The set screw is captivated between the knob and the workpiece or fixture. OPTION 3: RETAIN FROM TOP – The bolt passes through the workpiece or fixture and pulls the knob into position.

OPTION 1: PASS-THROUGH BOLT

OPTION 2: CAPTIVE SET SCREW

OPTION 3: RETAIN FROM TOP

Option 2 not recommended for B Type. ! CAUTION

Standard clamping knobs have a metric positioning boss which is Ø25mm and ground to a fit of h6. This boss is 5mm tall. The overall measurements of the clamping knob is Ø40mm by 40mm tall.

The SBA Knob is ground to fit with the center ground taper of the chuck. This fit establishes centerline location. This location will repeat to better than +/-.0002" (.005mm).

The SBB Knob is ground like a diamond pin and orients your work relative to the centerline of the SBA Knob.

The SBC Knob is ground undersize. It will bring the bottom of the workpiece or fixture down on the top of the UNILOCK chuck.

40

KNOBS, BALLS AND PALLETS

SYSTEM 40 KNOBS

Ø25 H7 +.021 0

35

Contact Pads (B Type Only)

5

A

Hex

Section A-A

A

Knob Type

Catalog Number

Repeatability (in)

Internal Thread

Pass-Through Bolt Size

Description

Hex

15.260.300 15.260.301 15.260.302 15.260.400 15.260.401 15.260.402

A B C A B C

SBA—Absolute Position

.0002 .0002 .0040 .0002 .0002 .0040

M12 M12 M12 M16 M16 M16

M10 M10 M10 M12 M12 M12

10mm 10mm 10mm 17mm 17mm 17mm

SBB—Orientation

SBC—Undersized .1mm—Downward Clamping Only

SBA—Absolute Position

SBB—Orientation

SBC—Undersize .1mm

• For inch options please consult the BIG DAISHOWA Engineering Dept. • All dimensions are in millimeters

SYSTEM 40 T-SLOT KNOBS

Thread

T-Slot

Knob Type

Catalog Number

Repeatability (in)

Description

Thread

T-Slot

15.250.360 15.250.361 15.250.366 15.250.367 15.250.362 15.250.363 15.250.364 15.250.365

A C A C A C A C

SBA—Absolute Position SBC—Undersized .3mm SBA—Absolute Position SBC—Undersized .3mm SBA—Absolute Position SBC—Undersized .3mm SBA—Absolute Position SBC—Undersized .3mm

.0002 .0040 .0002 .0004 .0002 .0040 .0002 .0040

M10xP1.5 M10xP1.5 M12xP1.75 M12xP1.75 M12xP1.75 M12xP1.75 M12xP1.75 M12xP1.75

14mm 14mm 16mm 16mm 18mm 18mm 22mm 20mm

• T-nuts and fasteners are included • Inch t-slot versions available upon request • All dimensions are in millimeters

41

KNOBS, BALLS AND PALLETS

SYSTEM 40 PASS-THROUGH Ø12MM KNOBS AND SCREWS

Ø12 H6 +.011 0

Ø12 H6 +.011 0

Thread G

Thread G

Thread G

SYSTEM 40 Pass-Through Ø12mm Knob

Ø18.5

Knob Type SBA SBB

Knob Catalog Number

15.250.317 15.250.318 15.250.319

Screw

SBA

Knob

12

L 1

L 2

Hex 10

SYSTEM 40 Pass-Through Ø12mm Screw

Screw Catalog Number

ØD 1

Thread (G)

L 1

L 2

L 3

L 4

15.250.540 15.250.541

12 12

M12xP1.75 M12xP1.75

50.0 55.0

22.0 22.0

30.0 35.0

8.0

13.0

• All dimensions are in millimeters • Other sizes available upon request; please consult the BIG DAISHOWA Engineering Dept.

42

KNOBS, BALLS AND PALLETS

SYSTEM 40 PASS-THROUGH Ø16MM KNOBS AND SCREWS

Ø16 H6 +.011 0

Ø16 H6 +.011 0

Thread G

Thread G

Thread G

SYSTEM 40 Pass-Through Ø16mm Knob

Ø21

Knob Type SBA SBB

Knob Catalog Number

15.250.307 15.250.308 15.250.309

Screw

SBC

Knob

12.5

L 1

L 2

Hex 14

SYSTEM 40 Pass-Through Ø16mm Screw

Screw Catalog Number

ØD 1

Thread (G)

L 1

L 2

L 3

L 4

15.250.520 15.250.521 15.250.529 15.250.530 15.250.533

16 16 16 16 16

M16xP2 M16xP2

55.0 43.5 37.5 28.0 28.0

25.0 24.0 18.0

35.0 23.5 17.5

10.0

— — — —

M12xP1.75 M12xP1.75 M10xP1.5

— —

8.0 8.0

• All dimensions are in millimeters

43

KNOBS, BALLS AND PALLETS

SYSTEM 25 KNOBS

M10 SHCS

19.5

Contact Pads (B Type Only)

A

5

Section A-A Scale 1:1

A

M8 C-Sink Cap Screw

Fig. 1

Thread

Thread

Ø10.5

+.017 +.006

Ø12 G6

Ø16

Fig. 3

Fig. 2

Knob Type

Catalog Number

Location Diameter

Internal Thread

Pass-Through Thread

Weight (lbs)

Description

Hex

Fig.

15.255.400 15.255.401 15.255.402 15.255.410 15.255.411 15.255.412 15.255.420 15.255.421 15.255.542

A B C A B C A B C

SPA25—Absolute Position

SPB25—Orientation

Ø18 h6

M10

M8

8

1

.11

SPC25—Undersized .1mm SPA25—Absolute Position

SPB25—Orientation

Ø18 h6

M8

— 2

.11

SPC25—Undersized .1mm

SPA25—Absolute Position (Thru Bore)

SPB25—Orientation (Thru Bore)

Ø12 G6

M8/M10/M12

— 3

.11

SPC25—Undersized .1mm (Thru Bore)

• All dimensions are in millimeters • See pg. 62 for compatible chucks

44

KNOBS, BALLS AND PALLETS

SYSTEM 25 SHOULDER SCREWS

Hex 8

L 1

L 2

L 3

Catalog Number

Shoulder Diameter

Weight (lbs)

Thread

L 1

L 2

L 3

15.255.425 15.255.426 15.255.427 15.255.428

28.0 17.5 14.5 11.5

45.7 35.7 32.7 29.7

M12xP1.75

Ø12 h5

14.4

.04

M10xP1.5 M8xP1.25

• All dimensions are in millimeters • Other sizes available upon request; please consult BIG DAISHOWA Engineering Dept.

45

KNOBS, BALLS AND PALLETS

SYSTEM 68 KNOBS

ØD H7 Thread

Ød

Knob Type

Fig. 1

Bolt Size

Thread ØD H7

M24xP3

Ø d h6

ØD H7

Knob Type

Ø35

Fig. 2

Hex 10mm

Knob Type

Catalog Number

Fig.

Description

Bolt Thread

ØD/Ød

15.500.593 15.500.594 15.500.595 15.500.596 15.500.597 15.500.598 15.500.603 15.500.604 15.500.605 15.500.606 15.500.607 15.500.608

A B C A B C A B C A B C

1 1 1 1 1 1 1 1 1 2 2 2

SBA—Absolute Position

M24 M24 M24 M30 M30 M30 M24 M24 M24 M24 M24 M24

57H7/57h6 57H7/57h6 57H7/57h6 57H7/57h6 57H7/57h6 57H7/57h6 25H7/25h6 25H7/25h6 25H7/25h6 25H7/25h6 25H7/25h6 25H7/25h6

SBB—Orientation

SBC—Retention Only SBA—Absolute Position

SBB—Orientation

SBC—Retention Only SBA—Absolute Position

SBB—Orientation

SBC—Retention Only SBA—Absolute Position

SBB—Orientation

SBC—Retention Only

• All dimensions are in millimeters

46

KNOBS, BALLS AND PALLETS

5-AXIS STABILIZER BALL TO KNOB ADAPTOR

Ball Size

Catalog Number

Ball Size

Length (mm)

Weight (lbs)

Description

15.252.060 15.252.061

SBA40 SBA40

Ø25.4

35 24

1.5 2.4

Ø50

SYSTEM 40

Ø78

5-AXIS STABILIZER BALL MOUNTING SCREW

Catalog Number

Ball Size

Length (mm)

Weight (lbs)

Thread

Length

15.252.080 15.252.082 15.252.084 15.252.085 15.252.086 15.252.087 15.252.089

M12xP1.75

.4 .4 .4 .9

Ball Size

40

M16xP2

Hex Nut

Ø25.4

M20xP2.5

50

M24xP3 M24xP3

50 60 70

1.2 1.3 1.5

M30xP3.5

Ø50

M36xP4

• Hex nut included; T-nut not included • Inch sizes available upon request

5-AXIS STABILIZER BALL AND COLLAR

Ø18 H6 +.011 0

M10

M10

Ø18 -.05 -.01

Fig. 1

Fig. 2

Catalog Number

Ball Size

Height (mm)

Weight (lbs.)

Fig.

Description

15.252.382 15.252.383 15.252.385

1 2

5-Axis Stabilizer Ball and Collar with Location 5-Axis Stabilizer Ball and Collar without Location

.2

Ø25.4

25

1&2

5-Axis Stabilizer Ball and Collar Set

.4

*Set includes 1 ball and 3 collars • See pg. 48 for Ø50 balls

47

KNOBS, BALLS AND PALLETS

5-AXIS STABILIZER BALL LOCATION TYPE

ø25 h6 ø22 (ø32.50)

ø24.50 ø17

Catalog Number

Weight (lbs)

15.252.100

.9

• All dimensions are in millimeters • M16 x L50 SHCS not included

5-AXIS STABILIZER BALL GRIP TYPE

øD ød

Catalog Number

Screw Size

Weight (lbs)

Ød

ØD

h

15.252.101 15.252.102

M16 M12

17 13

24.5 18.5

16.5

.9 .9

13

• All dimensions are in millimeters • Mounting screw not included • This will mare surfaces and should be used with rough surfaces

48

KNOBS, BALLS AND PALLETS

SYSTEM 40 PALLETS Preassembled with Knobs and Handles Pallets are provided fully assembled with their required quantity of UNILOCK knobs and lifting handles, and are available in either steel or aluminum. SYSTEM 40 MONO PALLET The UNILOCK ESM 138 chuck accepts a 14mm key or pin. The UNILOCK ESM 176 chuck accepts a 25mm key or pin.

CAN BE CONFIGURED FOR THE FOLLOWING CHUCKS • ESM/EFM/ERGO 138 • MLM/MCM 150 • ISM 160

• MSM 170 • ESM 176 TURBO • DC 200

SYSTEM 40 DUO & QUAD PALLET Duo and Quad pallets with load on the UNILOCK QC 400 or any set of chucks on 200mm spacing. Can be configured for the UNILOCK ERGO base stations While loading and unloading work into the fixture, the holes in the bottom of the pallet mate to setup plates that stabilize the pallet for safe operation outside of a UNILOCK chuck.

Pallet Type

Pallet Name

Catalog Number

Thickness (mm)

Length (mm)

Width (mm)

Length w/Handles (mm)

#12 H7 of Pin Holes

Weight (lbs)

Material

15.260.540A 15.260.540B 15.260.640A 15.260.640B 15.260.545A 15.260.645A 15.270.546A 15.270.646A 15.270.544A 15.270.644A

0° (1x)

MONO*

SPA200

STEEL

20

199

199

279

9.3

0° & 45° (2x)

0° (1x)

MONO*

APA200

ALUM

25

199

199

279

4.9

0° & 45° (2x)

SAP400 APA400 SPQ300 APQ300 SPQ400 APQ400

STEEL ALUM STEEL ALUM STEEL ALUM

20 25 20 25 20 25

— — — — — —

23.4 11.2 34.4 16.3 61.7 26.5

DUO

399

159

481

TRIO

599

159

681

QUAD

399

399

481

*MONO pallets include Ø12mm pin (1x) and Ø25mm pin (1x); customer to install as needed **For pallet compatibility to older base stations please contact the BIG DAISHOWA Engineering Dept. for assistance

49

KNOBS, BALLS AND PALLETS

SYSTEM 40 MONO PALLET

25 (AL) 20 (ST)

199 197

81

10x45º

R10 (3x)

Pallet A Fig. 1

Pallet B Fig. 1.2

(279)

SBA40 Knob

• Ø12mm pin (1x) and Ø25mm pin (1x); customer to install as needed • For pallet compatibility please contact the BIG DAISHOWA Engineering Dept. for assistance

SYSTEM 40 DUO PALLET

25 (AL) 20 (ST)

399

10x45º

R10 (3x)

(481)

SBA Knob

SBB Knob

+.015 -.015

200

Fig. 2

• All dimensions are in millimeters

50

KNOBS, BALLS AND PALLETS

SYSTEM 40 TRIO PALLET

25 (AL) 20 (ST)

599

10x45º

R10 (3x)

(681)

SBA Knob

SBB Knob

SBC Knob

+.015 -.015

+.015 -.015

200

200

Fig. 3

SYSTEM 40 QUAD PALLET

25 (AL) 20 (ST)

399

SBC Knob (2x)

38x45º

R35 (3x)

(481)

SBA Knob

SBB Knob

+.015 -.015

200

Fig. 4

• All dimensions are in millimeters

51

52

MULTI-AXIS SYSTEMS PROVIDES FLEXIBILITY AND FUNCTIONALITY OVERVIEW

54-55

5-AXIS BASE

56-57

5-AXIS B-STYLE BASE

58-59

5-AXIS C-STYLE BASE

60-61

5-AXIS DOUBLE-ENDED CLAMPING BASE

62-63

5-AXIS TABLE ADAPTERS

64-65

5-AXIS EXTENSIONS

66-67

DOUBLE-ENDED BASES

68

ESA125/85 FLAT CHUCK

70-71

5-AXIS REDUCTIONS AND SHIMS

72-73

5-AXIS ER COLLET CHUCKS

74

SERRATED ADAPTERS

75

5-AXIS SYSTEM 25

76-78

SYSTEM 68

80-83

53

MULTI-AXIS SYSTEMS

5-AXIS SYSTEMS When and Where You Need It

If your optimal work zone is directly over the center of the machine table, our low-profile grid plates with integrated UNILOCK zero-point clamping systems are available, out of the box, as turnkey solutions. By offering cap screw and dowel pin technology intermixed with zero-point UNILOCK chucks, our base plates allow you to quickly load virtually any workholding product, including 5-axis vises and dovetail clamping solutions. If the workpiece needs to be elevated above the table and that feature is not built into the workholding component, UNILOCK can be used to raise the workholding or the workpiece. UNILOCK clamping knobs can also be attached directly to the bottom of the workpieces and within 25mm of the machining edge. UNILOCK zero-point clamping chucks can also be surface mounted directly to the machine table. With an overall height of 46mm, the UNILOCK ASM 146 and ISM 160 chucks are excellent candidates when you need to quickly bolt on a quick-change UNILOCK receiver. Our 5-axis clamping products, UNIVICE SYNCHRO, UNICLAMP and FIRST GRIP can also be directly affixed to a machine table, a grid plate or processed in UNILOCK chucks.

ASSEMBLY EXAMPLES

Reductions

Extensions

UNILOCK Knobs

UNILOCK Knobs

Bases

Bases

Bases

Grid Plate

UNILOCK Basestation

Machine Table

Machine Table

Machine Table

54

MULTI-AXIS SYSTEMS

5-AXIS SYSTEM 40 UNILOCK Riser Chucks, Extensions & Reductions

UNILOCK riser chucks have a working diameter of 80mm. They are available on base plates or as stacking modules in heights of 75mm and 100mm. Base plate chucks have Ø12mm dowel pin holes that locate chucks on 40mm and 50mm grid patterns. Base chucks can also have clamping knobs attached for use in other UNILOCK chucks, or the stacking version can be used for elevation and clearance. All chucks open and close quickly with a single hex key. The chucks are all capable of clamping any UNILOCK SYSTEM 40 clamping knob (40mm). By using a riser assembly, workpieces can be clamped 40mm from their edge. Extensions allow the clamping knob to be anchored 25mm from the workpiece edge. Extensions reduce the working diameter from 80mm to 50mm and add an additional elevation of 25mm or 50mm.

SBA Clamping Knob (Not Included with 5-Axis Base)

Clamping Saddle

Clamping Jaw

Clamping Jaw

Base

Differential Screw (6mm Hex Wrench Not Included)

55

MULTI-AXIS SYSTEMS

5-AXIS BASE Integral Mounting Flange Offered with a timing key for single base applications. Table adapters are also offered. These chucks can be mounted on 40mm, 50mm and M12 grids, as well as on UNILOCK clamping systems using UNILOCK clamping knobs.

FEATURES • Elevate your workpiece for clearance • Use UNILOCK clamping knobs

• Stackable chucks available • Quickly open and close with a single hex key

Catalog Number

Notch (Width x Qty)

Clamping Force (lbs) (at 11 ft/lbs)

Weight (lbs)

Height

15.250.101 15.250.103* 15.250.102 15.250.104*

75

8.1

10 H7 x 1

2,200-2,500

100

9.8

10 H7 x 1 *Timing key option is a non-stock standard • All dimensions are in millimeters • Manual actuation, 6mm hex wrench not included

ACCESSORIES

KNOBS PG. 40

56

MULTI-AXIS SYSTEMS

Ø144

+.01 -.01 +.01 -.01

100 120

Ø12 G6 (6x)

10 h7

6

35.5

Hex 6 (15 Nm) (11 ft-lbs.)

Ø25 H7

SYSTEM 40 Knob (Not Included) 15.260.400

15.250.101 & 15.250.103

35.5

10 h7

15.250.102 & 15.250.104

• All dimensions are in millimeters • Dimensions marked are for notch option

57

MULTI-AXIS SYSTEMS

5-AXIS B STYLE BASE For Flexibility of Position Chucks allow for flexibility of the position of the base via the use of a slotted flange directly over t-slots. These chucks can be mounted on 40mm, 50mm and M12 grids as well as on t-nut machine tables.

FEATURES • Elevate your workpiece for clearance • Use UNILOCK clamping knobs

• Stackable chucks available • Quickly open and close with a single hex key

Catalog Number

Notch (Width x Qty)

Clamping Force (lbs) (at 11 ft/lbs)

Weight (lbs)

Height

15.250.111 15.250.113* 15.250.112 15.250.114* 15.250.115 15.250.116*

125

14.7

10 H7 x 1

150

2,200-2,500

16.8

10 H7 x 1

175

18.6

10 H7 x 1 *Timing key option is a non-stock standard • All dimensions are in millimeters • Manual actuation, 6mm hex wrench not included

ACCESSORIES

KNOBS PG. 40

58

MULTI-AXIS SYSTEMS

100 Ø168

+.01 -.01

50

Ø12 G6 (6x)

+.01 -.01

100

Hex 6 (Max 15 Nm) (Max 11 ft-lbs)

Ø25 H7

• All dimensions are in millimeters

59

MULTI-AXIS SYSTEMS

5-AXIS C-STYLE BASE Allows for mounting over t-slots in a patterns that allow for a tighter spacing in either linear or circuital.

FEATURES • Elevate your workpiece for clearance • Use UNILOCK clamping knobs

• Stackable chucks available • Quickly open and close with a single hex key

ACCESSORIES

Catalog Number

Height (mm)

Weight (lbs)

15.250.117 15.250.118

100 125

5.5 5.7

KNOBS PG. 40

LAYOUT OPTIONS

Ø310

Ø300 Ø150

Ø160

Ø250

Ø350

Ø450

60

MULTI-AXIS SYSTEMS

100 Min 140 Max

Ø80

Hex 6 (15 Nm) (11 ft-lbs)

• All dimensions are in millimeters

61

MULTI-AXIS SYSTEMS

5-AXIS DOUBLE-ENDED CLAMPING BASE Knobs Can be Used on Grids and T-Slot Tables Allows for knobs to be used on grids and t-slot tables to affix the clamping base. This offers a universal interface between your machine table and workpiece.

FEATURES • Elevate your workpiece for clearance • Use UNILOCK clamping knobs

• Stackable chucks available • Quickly open and close with a single hex key

Catalog Number

Notch (Width x Qty)

Clamping Force (lbs) (at 11 ft/lbs)

Weight (lbs)

Height

15.250.105 15.250.106*

125

2,200-2,500

11

10 H7 x 1

ACCESSORIES

*Timing key option is a non-stock standard • All dimensions are in millimeters • Manual actuation, 6mm hex wrench not included

KNOBS PG. 40

62

MULTI-AXIS SYSTEMS

Ø144

Ø12 G6 (6x)

+.01 -.01

100

+.01 -.01

120

10 h7

35.5

Ø80

Hex 6 (Max 15 Nm) (Max 11 ft-lbs)

• All dimensions are in millimeters • Dimensions marked are for notch option

63

MULTI-AXIS SYSTEMS

5-AXIS TABLE ADAPTERS Mount Anywhere to the Table T-Slots or Grid Holes Allows the base chucks to be mounted anywhere they are needed in order to access the table t-slots or grid holes, while providing a strong foundation. They come in three different styles with up to four different heights.

FEATURES • 5-Axis base chucks can mount anywhere • Strong foundation

• 4 different heights available

Catalog Number

Height

15.250.175

50

• All dimensions are in millimeters

64

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110

Powered by